Heater Hose for 2013-2019 Ford Escape - Gates 12530

$60.99

Vehicles this part fits

    Part number: 12530
    UPC: 770075863885
    Condition: New
    Weight: 3.24 LBS
    Item Package Quantity: 1
    $60.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12530
    Gates HVAC Heater Hose P/N:12530
    $60.99
    $60.99

    Keep coolant moving through the heater circuit with the GATES heater hose, part number 12530. This factory-molded, OEM-style hose is engineered for the smaller, tighter-fitting engine compartments of today's vehicles and drops in as a direct-fit replacement for the 2013-2019 Ford Escape. It's cataloged for the valve-to-radiator position, and its pre-formed shape helps it route cleanly through the coolant path.

    • EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover.
    • Electrochemical resistance: engineered to resist electrochemical degradation, a leading cause of hose failure.
    • Spec-rated: meets SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40°F to 275°F (-40°C to 135°C).
    • Versatile: suitable for coolant, water, and air applications, and approved for marine use. Do not use for fuel or oil transfer.

    A small-I.D. molded coolant hose like this addresses cracked, swollen, or leaking heater lines. If a failing hose is the source of coolant loss on your 2013 Ford Escape, this replaces it. Gates recommends installing new hose clamps whenever a coolant hose is replaced.

    Interchange: CV6Z 18N345 S
    CV6Z18N345S · F11925 · 13530

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    F11925, CV6Z 18N345 S, 12530, 13530

    Frequently Asked Questions

    Does this GATES hvac heater hose fit my 2013 Ford Escape?

    Yes. This hose is a direct-fit replacement for the 2013-2019 Ford Escape. Check the "Vehicles it fits" section to confirm your specific engine and year.

    What position is this heater hose for?

    It is cataloged for the valve-to-radiator position in the coolant/heater circuit.

    What is this hose made of?

    It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and it meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Can I use this hose for fuel or oil?

    No. It is intended for coolant, water, and air applications and is approved for marine use, but it must not be used for fuel or oil transfer.

    Should I replace the hose clamps too?

    Gates recommends installing new hose clamps each time a coolant hose is replaced to help ensure a reliable seal.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review