Gates HVAC Heater Hose P/N:18460
Route hot coolant to your cabin heater and keep the system sealed with the GATES heater hose 12551, a premium factory-molded replacement. It drops in as a direct-fit coolant hose for the 2013-2020 Ford Fusion — see the "Vehicles it fits" section for the specific engine applications. This is the HEATER (UPPER) position hose, molded to fit today's smaller, tighter-fitting engine compartments in OEM style.
Molded design: Factory-molded to route cleanly through tight spaces, with all the quality features of Gates molded coolant hose.
EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover.
Electrochemical resistance: Engineered to resist electrochemical degradation, a leading cause of hose failure.
Rated specs: Meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a temperature range of -40°F to 275°F (-40°C to 135°C).
Usable for coolant, water, and air applications, and also approved for marine use. Do not use for fuel or oil transfer applications. Gates recommends replacing the hose clamps each time a new coolant hose is installed. A cracked, swollen, or leaking heater hose can cause coolant loss and poor cabin heat — if the old hose is the cause, this GATES hvac heater hose replaces it.
Interchange: DG9Z 18472 D · DG9Z 8B081 R
DG9Z18472D · DG9Z8B081R · F11930 · 13551
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What vehicles does the GATES heater hose 12551 fit?
It is a direct-fit replacement for the 2013-2020 Ford Fusion. Check the "Vehicles it fits" section to confirm the specific engine application for your vehicle.
What is this GATES molded heater hose made of?
It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and it meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
What position does this hose replace?
This is the HEATER (UPPER) position hose. It is factory-molded in OEM style to route through smaller, tighter-fitting engine compartments.
What is the temperature range of this hose?
It is rated from -40°F to 275°F (-40°C to 135°C). It can be used for coolant, water, and air applications, but not for fuel or oil transfer.
Do I need new hose clamps when installing it?
Gates recommends replacing the hose clamps each time a new coolant hose is installed to help ensure a reliable seal.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.