Heater Hose for 2014-2021 Tesla Motors & More - Gates 12553

$6.99

Vehicles this part fits

    Part number: 12553
    UPC: 770075867586
    Condition: New
    Weight: 3.60 LBS
    Item Package Quantity: 1
    $6.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12553
    Gates HVAC Heater Hose P/N:12553
    $6.99
    $6.99

    Route coolant reliably through tight cooling-system spaces with the Gates heater hose (MPN 12553), a factory-molded, OE-style ThermalPro Premium Molded Heater Hose. It drops in as a direct-fit replacement for the 2014-2021 Tesla Motors and the 2016-2021 Tesla X, and is cataloged for the 4-way valve to pump position near the chiller. See the "Vehicles it fits" section for full engine-level fitment.

    • Construction: EPDM tube, synthetic fiber knit reinforcement, and EPDM cover.
    • Degradation-resistant: engineered to resist electrochemical degradation — the leading cause of hose failure.
    • Molded fit: shaped for today's smaller, tighter engine compartments; suitable for coolant, water and air applications, and also approved for marine use.
    • Rated: meets SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40°F to 275°F (-40°C to 135°C).

    This Gates molded heater hose carries the coolant/water flow along its routing and is built with the quality features of Gates molded coolant hose, similar to OEM specifications. Do not use it for fuel or oil transfer. Gates recommends replacing the hose clamps each time a new coolant hose is installed.

    Interchange: F10678 · 13553 · R45061 · 103674100H

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    F10678, 12553, 13553, R45061, 103674100H

    Frequently Asked Questions

    What vehicles does the Gates heater hose 12553 fit?

    It is a direct-fit replacement for the 2014-2021 Tesla Motors and the 2016-2021 Tesla X. Check the "Vehicles it fits" section to confirm the application for your vehicle.

    Where does this hose install?

    It is cataloged for the 4-way valve to pump position, near the chiller, in the cooling system.

    What is this Gates hvac heater hose made of?

    It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Can this hose be used for other applications?

    It is suitable for coolant, water and air applications and is also approved for marine use. Do not use it for fuel or oil transfer applications.

    Do I need new clamps when installing this molded heater hose?

    Gates recommends replacing the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review