Heater Hose for 1988-1991 Honda Civic & More - Gates 18200

$8.99

Vehicles this part fits

    Part number: 18200
    UPC: 072053178234
    Condition: New
    Weight: 0.06 LBS
    Item Package Quantity: 1
    $8.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18200
    Gates HVAC Heater Hose P/N:18200
    $8.99
    $8.99

    Gates 18200 heater hose for the 1988-1991 Honda Civic 4-cylinder 1.5L or 1.6L and other vehicles carries engine coolant between its connection points. The Gates heater hose is factory-molded and can be used for coolant, water and air applications.

    • Gates Small I.D. Molded Coolant Hose, factory-molded for smaller, tighter engine compartments
    • Approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 18200 heater hose
    • Also called: HVAC heater hose
    • Fits: the 1988-1991 Honda Civic 4-cylinder 1.5L or 1.6L and other vehicles
    • Position: throttle body to pipe, throttle body to engine, intake manifold to thermostat, tee-1 to pipe-1, pipe to throttle body, tee to throttle body, carburetor to intake manifold, pipe-6 to pipe-7, intake manifold to pipe-3
    • Material: EPDM
    • Condition: New

    A heater hose that is cracked, swollen or leaking coolant can be due for replacement. These signs alone do not prove the hose is at fault, since a loose clamp can leak the same way. The 1993-1998 Nissan Quest V6 3.0L takes one.

    Fits

    The hose also fits the 1993-1998 Nissan Quest V6 3.0L and the 1993-1998 Mercury Villager V6 3.0L, plus a wide range of other makes and models. If your vehicle is not named here, look for it in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: throttle body to pipe, throttle body to engine, intake manifold to thermostat, tee-1 to pipe-1, pipe to throttle body, tee to throttle body, carburetor to intake manifold, pipe-6 to pipe-7, intake manifold to pipe-3
    • Quantity per vehicle: 1
    • Centerline length: 7.1 in (180 mm)
    • End 1 inside diameter: 0.31 in (8 mm)
    • End 2 inside diameter: 0.31 in (8 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: F3XY 18472 J
    14018S · 4592043 · 4592110 · 86802 · B86802 · 19504PE0000 · 19504PM5A01 · N3A113691 · MD089470 · MD183348 · 10200

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14018S, 18200, 4592043, 4592110, 86802, B86802, F3XY 18472 J, 19504PE0000, 19504PM5A01, N3A113691, MD089470, MD183348, 10200

    Frequently Asked Questions

    Will this Civic heater hose fit a 1988-1991 Honda Civic 4-cylinder 1.5L or 1.6L?

    Yes, Gates 18200 is listed for the 1988-1991 Honda Civic 4-cylinder 1.5L or 1.6L. For other years or models, look in the "Vehicles it fits" section.

    Is this Nissan Quest heater hose listed for the 1993-1998 Nissan Quest V6 3.0L?

    Yes, Gates 18200 fits the 1993-1998 Nissan Quest V6 3.0L, and that vehicle takes one hose.

    What is this HVAC heater hose made of?

    This heater hose has an EPDM tube, a synthetic fiber knit reinforcement and an EPDM cover. It is a molded hose with an 8 mm inside diameter at both ends.

    What temperature range does the Gates molded heater hose handle?

    Gates 18200 has a temperature range of -40 °F to 275 °F (-40 °C to 135 °C). It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Should I replace the hose clamps when installing this heater hose?

    Yes, replace the hose clamps each time a new coolant hose is installed. Do not use this hose for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review