Heater Hose for 1999 Chevrolet C1500 & More - Gates 19023

$29.99

Vehicles this part fits

    Part number: 19023
    UPC: 072053412338
    Condition: New
    Weight: 0.38 LBS
    Item Package Quantity: 1
    $29.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19023
    Gates HVAC Heater Hose P/N:19023
    $29.99
    $29.99

    Gates 19023 heater hose for the 1999 Chevrolet C1500 V8 5.7L and other vehicles carries engine coolant through the heater circuit. This Gates molded heater hose is also listed as an HVAC heater hose and has no branches or quick-connect fittings.

    • Gates Small I.D. Molded Coolant Hose, factory-molded for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Used for coolant, water and air applications and also approved for marine use

    Quick facts

    • Part: Gates 19023 heater hose
    • Also called: HVAC heater hose
    • Fits: 1999 Chevrolet C1500 V8 5.7L and other vehicles
    • Material: EPDM
    • Condition: New

    Cracks, soft or swollen spots, or damp coolant stains on a hose can point to one that needs replacing, but a leak can also come from a clamp or connector. With the engine off and cool, look the hose and its clamps over first.

    Fits

    It is listed for a wide range of Chevrolet and GMC models, including the 1999 Chevrolet K1500 V8 5.7L and the 1999 Chevrolet Tahoe V8 5.7L or 6.5L, which each take one. If your truck is not named here, open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • End 1 inside diameter: 16 mm (0.62 in)
    • End 2 inside diameter: 19 mm (0.75 in)
    • Centerline length: 343 mm (13.5 in)
    • Quantity per vehicle: 1

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: 14153S · 86029 · F10805 · 15554920 · 15956410 · 11023

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14153S, 19023, 86029, F10805, 15554920, 15956410, 11023

    Frequently Asked Questions

    Is this the Chevy Tahoe heater hose for the 1999 Chevrolet Tahoe V8 5.7L or 6.5L?

    Yes, Gates 19023 is listed for the 1999 Chevrolet Tahoe V8 5.7L or 6.5L. For any other model or engine, open the "Vehicles it fits" section.

    Is this a Gates 3/4 heater hose, and what are the end sizes?

    This Gates 19023 hose has one end with a 19 mm (0.75 in) inside diameter and the other with 16 mm (0.62 in), over a 343 mm (13.5 in) centerline length.

    What temperature range does this Gates heater hose handle?

    It is rated from -40 °F to 275 °F (-40 °C to 135 °C) and meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Can this EPDM heater hose be used for fuel or oil lines?

    No. Gates 19023 is for coolant, water and air applications and is also approved for marine use; it is not for fuel or oil transfer.

    Do I need new clamps when installing this molded hose?

    Plan on new hose clamps. They should be replaced each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review