Heater Hose for 1999-2001 Volkswagen Jetta & More - Gates 18222

$31.99

Vehicles this part fits

    Part number: 18222
    UPC: 072053412017
    Condition: New
    Weight: 0.14 LBS
    Item Package Quantity: 1
    $31.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18222
    Gates HVAC Heater Hose P/N:18222
    $31.99
    $31.99

    Gates 18222 heater hose for the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L or V6 2.8L and other vehicles carries engine coolant through the cooling circuit. This Gates molded heater hose is factory-molded in OEM style for today's smaller, tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose line, with the quality features of Gates molded coolant hose
    • EPDM tube with synthetic fiber knit reinforcement and an EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Used for coolant, water and air applications, and approved for marine applications

    Quick facts

    • Part: Gates 18222 heater hose
    • Also called: HVAC heater hose
    • Fits: 1999-2001 Volkswagen Jetta 4-cylinder 2.0L or V6 2.8L and other vehicles
    • Position: Throttle body to engine, pipe-2 to reservoir, engine to pipe-2, reservoir to pipe-3
    • Material: EPDM
    • Condition: New

    Visible cracks, a soft or swollen section, or coolant residue at the hose ends can mean a heater hose is wearing out. These signs alone do not prove the hose is at fault, since a loose clamp can leak in the same spot.

    Fits

    It is listed for a wide range of Volkswagen and Toyota models, such as the 1999-2001 Volkswagen Golf 4-cylinder 2.0L or V6 2.8L and the 1990-1995 Toyota 4Runner 4-cylinder 2.4L, and each takes one hose. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: Throttle body to engine, pipe-2 to reservoir, engine to pipe-2, reservoir to pipe-3
    • Quantity per vehicle: 1
    • Centerline length: 294 mm (11.57 in)
    • End 1 inside diameter: 8 mm (0.31 in)
    • End 2 inside diameter: 8 mm (0.31 in)

    Build and materials

    • Material: EPDM
    • Construction: Molded
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: 14030S · B86831 · F10715 · 10222 · 1626435030

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14030S, 18222, B86831, F10715, 10222, 1626435030

    Frequently Asked Questions

    Is the Gates 18222 the right heater hose for the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L or V6 2.8L?

    Yes. Gates 18222 is listed for the 1999-2001 Volkswagen Jetta 4-cylinder 2.0L or V6 2.8L, and one hose goes on that vehicle.

    Will the Gates 18222 work as a heater hose for the 1990-1995 Toyota 4Runner 4-cylinder 2.4L?

    Yes, Gates 18222 is listed for the 1990-1995 Toyota 4Runner 4-cylinder 2.4L. For another model or engine, open the "Vehicles it fits" section to check yours.

    What temperature range does this HVAC heater hose handle?

    The EPDM hose is rated from -40 °F to 275 °F (-40 °C to 135 °C).

    What inside diameter and length does the Gates 18222 have?

    Both ends have an 8 mm (0.31 in) inside diameter, and the centerline length is 294 mm (11.57 in).

    Can this molded heater hose be used for fuel or oil lines?

    No. Do not use it for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review