Heater Hose for 1992-1995 Honda Civic & More - Gates 18230

$19.99

Vehicles this part fits

    Part number: 18230
    UPC: 072053412093
    Condition: New
    Weight: 0.42 LBS
    Item Package Quantity: 1
    $19.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18230
    Gates HVAC Heater Hose P/N:18230
    $19.99
    $19.99

    Gates 18230 heater hose for the 1992-1995 Honda Civic 4-cylinder 1.5L or 1.6L and other vehicles carries engine coolant between the two points it connects. This Gates molded heater hose, also called an HVAC heater hose, is molded at the factory in OEM style.

    • Gates Small I.D. molded coolant hose line, built for smaller, tighter engine compartments
    • Used for coolant, water and air applications, and approved for marine applications
    • Resists electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 18230 heater hose
    • Also called: HVAC heater hose
    • Fits: 1992-1995 Honda Civic 4-cylinder 1.5L or 1.6L and other vehicles
    • Position: Throttle body to valve-2, pipe-4 to tee, reservoir to pipe-6, pipe-1 to valve-1
    • Material: EPDM
    • Condition: New

    A cracked or swollen hose, coolant seepage at the ends or a falling coolant level can mean a heater hose is worn. A loose clamp, a leaking radiator or a weak water pump can be behind coolant loss too, so find the cause before you buy a hose.

    Fits

    The listing covers a wide range of Honda, Acura, Cadillac, Pontiac and Oldsmobile models, including the 2000-2005 Cadillac DeVille V8 4.6L and the 2004-2005 Pontiac Bonneville V8 4.6L, as a direct-fit replacement. Open the "Vehicles it fits" section to check your exact model and engine. The quantity per application is one.

    Specifications

    Fit and size

    • Position: Throttle body to valve-2, pipe-4 to tee, reservoir to pipe-6, pipe-1 to valve-1
    • Quantity per application: 1
    • Centerline length: 351 mm (13.8 in)
    • Inside diameter, both ends: 8 mm (0.31 in)

    Build and materials

    • Construction: Molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 14037S · 63317 · B86835 · 86835 · 25672031 · 19525PY3000 · 19528P08A00 · 10230

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14037S, 18230, 63317, B86835, 86835, 25672031, 19525PY3000, 19528P08A00, 10230

    Frequently Asked Questions

    Will a Civic heater hose like this Gates 18230 fit the 1992-1995 Honda Civic 4-cylinder 1.5L or 1.6L?

    Yes, Gates 18230 is listed for the 1992-1995 Honda Civic 4-cylinder 1.5L or 1.6L; for another car, open the "Vehicles it fits" section to check the exact model and engine.

    What are the inside diameter and length of this Gates heater hose?

    Both ends have an 8 mm (0.31 in) inside diameter. The centerline length is 351 mm (13.8 in).

    What is this molded heater hose made of?

    It has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    What signs can show a heater hose is worn?

    Coolant seepage at the ends, a cracked or swollen hose, or a falling coolant level can point to a worn hose. Look only with the engine off and cool.

    Can the Gates 18230 hose carry fuel or oil?

    No, Gates 18230 is for coolant, water and air applications and is approved for marine use, and it must not be used for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review