Heater Hose for 1999-2005 Hyundai Sonata & More - Gates 18265

$14.99

Vehicles this part fits

    Part number: 18265
    UPC: 072053559187
    Condition: New
    Weight: 0.10 LBS
    Item Package Quantity: 1
    $14.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18265
    Gates HVAC Heater Hose P/N:18265
    $14.99
    $14.99

    Gates 18265 heater hose for the 1999-2005 Hyundai Sonata 4-cylinder 2.4L and other vehicles carries engine coolant through the cooling circuit. This Gates molded heater hose is factory-molded in an OEM style for today's smaller, tighter engine compartments.

    • Small I.D. molded coolant hose line from Gates
    • Used for coolant, water and air applications, and also approved for marine use
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 18265 heater hose
    • Also called: HVAC heater hose
    • Fits: 1999-2005 Hyundai Sonata 4-cylinder 2.4L and other vehicles
    • Position: Thermostat to pipe-2, throttle body to engine, throttle body inlet, pipe to throttle body
    • Material: EPDM
    • Condition: New

    Cracks, soft or swollen spots, seepage at the ends or a falling coolant level can mean an HVAC heater hose is wearing out. A loose clamp, a leaking thermostat housing or a weak radiator cap can be behind a coolant leak too, so find the source before buying a hose. Inspect the hose only when the engine is cool.

    Fits

    It is listed for a wide range of Hyundai, Kia, Mitsubishi, Suzuki, Chevrolet and Pontiac models, including the 2001-2003 Kia Optima 4-cylinder 2.4L and the 2001 Hyundai Santa Fe 4-cylinder 2.4L, and each takes one.

    Specifications

    Fit and size

    • Position: Thermostat to pipe-2, throttle body to engine, throttle body inlet, pipe to throttle body
    • Centerline length: 231 mm (9.1 in)
    • Inside diameter, both ends: 8 mm (0.3 in)
    • Quantity per vehicle: 1

    Build and materials

    • Type: Molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 14273S · 88969599 · 91174454 · 2546838007 · 2546838020 · 1310A290 · MD331160 · 10265 · 1349180J00 · 1349352G01

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14273S, 18265, 88969599, 91174454, 2546838007, 2546838020, 1310A290, MD331160, 10265, 1349180J00, 1349352G01

    Frequently Asked Questions

    Will the Gates 18265 heater hose fit a 2001-2003 Kia Optima 4-cylinder 2.4L?

    Yes, Gates 18265 is listed for the 2001-2003 Kia Optima 4-cylinder 2.4L; for another car, look up your year, make and engine in the "Vehicles it fits" section on this page.

    What size is this molded heater hose?

    Each end has an 8 mm (0.3 in) inside diameter, and the centerline length is 231 mm (9.1 in). Gates 18265 is a molded hose.

    What temperature range does this EPDM hose handle?

    The temperature range is -40 °F to 275 °F (-40 °C to 135 °C), and the hose meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Can this hose be used for fuel or oil lines?

    No. It is made for coolant, water and air applications, is also approved for marine use, and is not for fuel or oil transfer.

    Do I need new clamps when installing this heater hose?

    Yes, replace the hose clamps each time a new coolant hose such as 18265 is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review