Gates HVAC Heater Hose P/N:18460
Gates 18285 heater hose for the 2004-2008 Chevrolet Malibu 4-cylinder 2.2L, the 2008-2012 Malibu 4-cylinder 2.4L and other vehicles carries coolant between the engine and the reservoir. This Gates molded heater hose is a Small I.D. design, factory-molded in an OEM style to fit today's smaller, tighter engine compartments.
A heater hose that leaks coolant, feels soft or swollen, or shows cracks can be worn out, though a worn clamp or a leaking reservoir can be behind a coolant leak too, so find the source of the leak before replacing the hose.
This heater hose is a direct-fit replacement for the 2004-2008 Chevrolet Malibu 4-cylinder 2.2L, the 2008-2012 Malibu 4-cylinder 2.4L, the 2006-2010 Pontiac G6 4-cylinder 2.4L and the 2008-2009 Saturn Aura 4-cylinder 2.4L. If your car is not one of these, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One heater hose. The vehicles it fits take one.
Interchange: 18339L · E90908 · 86839 · 22627240 · 22682508 · 10285
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Pontiac G6 heater hose for a 2006-2010 G6 4-cylinder 2.4L?
Yes. Gates 18285 fits the 2006-2010 Pontiac G6 4-cylinder 2.4L, one hose per vehicle. If your car is another model, find its years and engine in the "Vehicles it fits" section.
Does this HVAC heater hose work for anything besides coolant?
Yes. Gates 18285 is used for coolant, water and air applications and is approved for marine use. Do not use it for fuel or oil transfer.
How long is the Gates 18285 heater hose, and what is its inside diameter?
Gates 18285 has a centerline length of 31.4 in (798 mm) and an inside diameter of .31 in (8 mm) at both ends.
What temperature range does this Gates heater hose cover?
This hose is rated from -40 °F to 275 °F (-40 °C to 135 °C). It also meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
Do I need new hose clamps with this heater hose?
Yes. Plan on new clamps, since hose clamps should be replaced every time a new coolant hose goes on.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.