Heater Hose for 1995-1999 Mitsubishi Eclipse & More - Gates 18313

Gates 18313 heater hose for the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and other vehicles carries engine coolant through the heating circuit. It is a factory-molded hose, so it comes already shaped for tight engine compartments.

• Gates Small I.D. Molded Coolant Hose line, factory-molded for smaller, tighter engine compartments
• Used for coolant, water and air, and approved for marine applications
• Built to resist electrochemical degradation, the leading cause of hose failure
• EPDM tube and cover with synthetic fiber knit reinforcement
• Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
• Temperature range of -40°F to 275°F (-40°C to 135°C)

Quick facts

• Part: Gates 18313 heater hose
• Also called: HVAC heater hose
• Fits: 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and other vehicles
• Position: Oil cooler to pipe-5
• Material: EPDM
• Condition: New

A worn heater hose can show up as coolant drips, a soft, swollen or cracked hose on a cool engine, or weak cabin heat. A failing water pump, a loose clamp or a clogged heater core can be behind those signs too, so find the cause before you buy a hose.

Fits

It fits the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and the 1995-1998 Eagle Talon 4-cylinder 2.0L.

Specifications

In the box

One heater hose. The quantity per vehicle is one.

Installation notes

• Replace the hose clamps each time a new coolant hose is installed.
• Not for fuel or oil transfer applications.

Interchange: 14052S · MD309661 · 10313

Product information is for general reference and may contain errors. See our Disclaimer.