Gates HVAC Heater Hose P/N:19057
Gates 18324 heater hose for the 2006-2011 Buick Lucerne V8 4.6L and other vehicles carries coolant between the water pump, the pipes and the reservoir. This Gates molded heater hose, also called an HVAC heater hose, is factory-molded in an OEM style.
Coolant leaks, a cracked or swollen hose, or a heater that blows cool air can mean a heater hose is wearing out. These signs alone do not prove the hose is the problem, since a clogged heater core can leave the heater cool too.
This hose is listed for a wide range of Buick, Cadillac, Oldsmobile and Pontiac models, led by the 2006-2011 Cadillac DTS V8 4.6L and the 2000-2005 Cadillac DeVille V8 4.6L, and the quantity per application is one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One molded heater hose.
Interchange: 14370S · 87903 · B87903 · 21999651 · 25672032 · 25760637 · 10324
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Gates 18324 the right heater hose for a 2000-2005 Cadillac DeVille V8 4.6L?
Yes. Gates 18324 is listed for the 2000-2005 Cadillac DeVille V8 4.6L, and that application takes one hose. Other cars are in the "Vehicles it fits" section.
How long is the Gates 18324 molded heater hose and what size are its ends?
The centerline length is 13.9 in (353 mm). Both ends have a 9 mm (0.36 in) inside diameter, and the hose has no branches.
What is this EPDM heater hose made of, and what temperatures can it handle?
This EPDM heater hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. The temperature range is -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C).
Where do I look for wear on a heater hose like this?
With the engine off and cool, look for cracks, soft or swollen spots and coolant residue at the hose ends. A shop can pressure-test the cooling system if you are unsure.
Can Gates 18324 be used for fuel or oil lines?
No. Gates 18324 is for coolant, water and air applications and is approved for marine use, but not for fuel or oil transfer. Replace the hose clamps when you install a new hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.