Heater Hose for 2000-2006 Toyota Tundra & More - Gates 18455

$30.99

Vehicles this part fits

    Part number: 18455
    UPC: 072053488173
    Condition: New
    Weight: 0.70 LBS
    Item Package Quantity: 1
    $30.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18455
    Gates HVAC Heater Hose P/N:18455
    $30.99
    $30.99

    Gates 18455 heater hose for the 2000-2006 Toyota Tundra V8 4.7L and other vehicles carries engine coolant on the pipe-3 to throttle body run. The Gates molded heater hose is also called an HVAC heater hose.

    • Gates Small I.D. molded coolant hose, factory-molded for smaller, tighter engine compartments
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 to 275 °F (-40 to 135 °C)
    • Approved for coolant, water, air and marine applications

    Quick facts

    • Part: Gates 18455 heater hose
    • Also called: HVAC heater hose
    • Fits: 2000-2006 Toyota Tundra V8 4.7L and other vehicles
    • Position: Pipe-3 to throttle body
    • Material: EPDM
    • Condition: New

    Cracks, soft or swollen spots, or a coolant leak can mean this hose is worn, though a loose hose clamp or the fitting at the throttle body can be behind the same signs. This listing is one hose, and the pipe-3 to throttle body run takes one.

    Fits

    Beyond the 2001-2007 Toyota Sequoia V8 4.7L and the 1998-2007 Toyota Land Cruiser V8 4.7L, it is listed for a wide range of Toyota and Lexus models. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: pipe-3 to throttle body
    • Quantity per vehicle: 1
    • Centerline length: 13.9 in (353 mm)
    • End 1 inside diameter: 0.5 in (13 mm)
    • End 2 inside diameter: 0.5 in (13 mm)
    • Branches: none

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 to 275 °F (-40 to 135 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Hose clamps should be replaced whenever a new coolant hose goes on.
    • Not for fuel or oil transfer applications.

    Interchange: 16207M · 80228 · F10752 · 10455 · 1626550060 · 1629550060

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16207M, 18455, 80228, F10752, 10455, 1626550060, 1629550060

    Frequently Asked Questions

    Is this the right Land Cruiser heater hose for a 1998-2007 Toyota Land Cruiser V8 4.7L?

    Yes. Gates 18455 is listed for the 1998-2007 Toyota Land Cruiser V8 4.7L. Open the "Vehicles it fits" section to check your exact model and engine.

    What is this Gates heater hose made of?

    Gates 18455 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    What size is this Gates 1/2 heater hose?

    Both ends have a 0.5 in (13 mm) inside diameter, and the centerline length is 13.9 in (353 mm). The hose is molded and has no branches.

    Can this Gates molded heater hose carry fuel or oil?

    No. This hose is for coolant, water and air applications and is also approved for marine use, but not for fuel or oil transfer. Its range is -40 to 275 °F (-40 to 135 °C).

    Do I need new hose clamps when I install a new heater hose?

    Yes. Replace the hose clamps each time a new coolant hose, such as Gates 18455, is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review