Heater Hose for 2009-2012 Toyota Corolla & More - Gates 18560

$53.99

Vehicles this part fits

    Part number: 18560
    UPC: 770075563105
    Condition: New
    Weight: 0.49 LBS
    Item Package Quantity: 1
    $53.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18560
    Gates HVAC Heater Hose P/N:18560
    $53.99
    $53.99

    Gates 18560 heater hose for the 2009-2012 Toyota Corolla 4-cylinder 2.4L and other vehicles carries engine coolant between the engine and the heater core. This listing is a new hose for the heater inlet.

    • Gates molded heater hose shaped at the factory for smaller, tighter engine compartments
    • Handles coolant, water and air applications and is approved for marine use
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 18560 heater hose
    • Also called: HVAC heater hose
    • Fits: 2009-2012 Toyota Corolla 4-cylinder 2.4L and other vehicles
    • Position: Heater inlet
    • Material: EPDM
    • Condition: New

    A wet or swollen hose, cracks or a coolant smell can mean this heater hose is worn, though a loose hose clamp or a leaking heater core may be behind a leak too, so find the source before replacing anything.

    Fits

    It fits the 2009-2012 Toyota Corolla 4-cylinder 2.4L and the 2009-2013 Toyota Matrix 4-cylinder 2.4L as a direct-fit replacement for these cars.

    Specifications

    Fit and size

    • Position: heater inlet
    • Quantity per vehicle: 1
    • Centerline length: 18.85 in (479 mm)
    • Inside diameter, both ends: 0.63 in (16 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Condition: new
    • Country of origin: United States

    In the box

    One heater hose. Either car takes just one at the heater inlet.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 16600M · F10769 · 10560 · 8724502C80

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16600M, 18560, F10769, 10560, 8724502C80

    Frequently Asked Questions

    Is this the heater hose for the 2009-2012 Toyota Corolla 4-cylinder 2.4L?

    Yes. Gates 18560 is the heater inlet hose for the 2009-2012 Toyota Corolla 4-cylinder 2.4L, and the 2009-2013 Toyota Matrix 4-cylinder 2.4L takes it too.

    Is this Gates heater hose only for coolant?

    No. Gates 18560 can be used for coolant, water and air applications and is also approved for marine use.

    What size is the inside diameter of this heater hose?

    Both ends have a 0.63 in (16 mm) inside diameter, and the centerline length is 18.85 in (479 mm).

    What does a worn EPDM heater hose look like?

    With the engine cool, look for cracks, a soft or swollen hose, or coolant stains at the ends. A shop can pressure-test the cooling system if you are unsure.

    Is the Gates 18560 an HVAC heater hose?

    Yes. Gates 18560 is a molded EPDM heater hose, also called an HVAC heater hose, made for the heater inlet position.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review