Gates HVAC Heater Hose P/N:18460
Gates 18562 rear heater hose for the 2002-2005 Kia Sedona V6 3.5L carries engine coolant through the heater circuit. This Gates heater hose is factory-molded to fit the smaller, tighter engine compartments of today's vehicles.
Coolant seepage at a hose end, a cracked or swollen hose, or a heater that blows cold can mean this hose is worn, though a stuck thermostat or a clogged heater core can also be behind a cold heater, so find the cause before you replace it.
This rear heater hose is a direct-fit replacement for the 2002-2005 Kia Sedona V6 3.5L, which takes one. The listing is a single hose.
Fit and size
Build and materials
Interchange: 14707S · F10771 · 0K55261B33C · 10562
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Kia Sedona heater hose for the 2002-2005 V6 3.5L?
Yes. Gates 18562 is a rear heater hose for the 2002-2005 Kia Sedona V6 3.5L, and that vehicle takes one.
Is this HVAC heater hose made of EPDM?
Yes. The tube and the cover are EPDM, and the reinforcement is a synthetic fiber knit.
Is the Gates molded heater hose approved for marine use?
Yes. Gates 18562 is approved for marine applications, and it also works in coolant, water and air applications.
What size is this rear heater hose?
Both ends have a 0.63 in (16 mm) inside diameter, and the centerline length is 12.33 in (313 mm).
Do I need new hose clamps when I install this heater hose?
Yes. Replace the hose clamps each time a new coolant hose goes on, including Gates 18562.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.