Heater Hose for 2013-2017 Subaru BRZ & More - Gates 18685

$32.99

Vehicles this part fits

    Part number: 18685
    UPC: 770075598978
    Condition: New
    Weight: 3.63 LBS
    Item Package Quantity: 1
    $32.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18685
    Gates HVAC Heater Hose P/N:18685
    $32.99
    $32.99

    Gates 18685 heater hose for the 2013-2017 Subaru BRZ H4 2.0L and other vehicles carries coolant at the throttle body inlet. This Gates molded heater hose, also called an HVAC heater hose, is factory-molded.

    • Shaped for today's smaller, tighter engine compartments
    • Used for coolant, water and air applications, and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 18685 heater hose
    • Also called: HVAC heater hose
    • Fits: 2013-2017 Subaru BRZ H4 2.0L and other vehicles
    • Position: Throttle body inlet
    • Material: EPDM
    • Condition: New

    A hose that is cracked, soft, swollen or weeping coolant can be due for replacement. With the engine off and cool, look over the hose and its ends for cracks, bulges or wet spots before replacing it, because a leak at a clamp or fitting needs a different fix.

    Fits

    This hose is a direct-fit replacement for the 2013-2017 Subaru BRZ H4 2.0L and the 2013-2016 Scion FR-S H4 2.0L. This listing is one hose, and one goes at the throttle body inlet on either car.

    Specifications

    Fit and size

    • Position: throttle body inlet
    • Quantity per vehicle: 1
    • Centerline length: 25.98 in (660 mm)
    • Inside diameter: 8 mm (0.31 in) at each end

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Condition: new
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16630M · F10791 · 10685 · 21204AB260 · SU00300405

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16630M, 18685, F10791, 10685, 21204AB260, SU00300405

    Frequently Asked Questions

    Does the Gates 18685 heater hose fit the 2013-2016 Scion FR-S H4 2.0L?

    Yes. Gates 18685 fits the 2013-2016 Scion FR-S H4 2.0L and the 2013-2017 Subaru BRZ H4 2.0L, and each takes one at the throttle body inlet.

    What is the Gates 18685 hose made of?

    Gates 18685 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2.

    How long is this heater hose and what is its inside diameter?

    This hose measures 25.98 in (660 mm) along its centerline, with an 8 mm (0.31 in) inside diameter at both ends.

    Can this heater hose carry fuel or oil?

    No. It is for coolant, water and air applications, and it is also approved for marine use. It is not for fuel or oil transfer.

    Should I replace the hose clamps when I install this heater hose?

    Yes. Replace the hose clamps each time a new coolant hose goes on.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review