Heater Hose for 1996-1997 Ford Vagoneta truck & More - Gates 18763

$25.99

Vehicles this part fits

    Part number: 18763
    UPC: 072053179118
    Condition: New
    Weight: 1.15 LBS
    Item Package Quantity: 1
    $25.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18763
    Gates HVAC Heater Hose P/N:18763
    $25.99
    $25.99

    Gates 18763 heater hose for the 1996-1997 Ford Vagoneta truck and other vehicles carries coolant between the heater and the water pump. This Gates molded heater hose, also called an HVAC heater hose, is factory-molded for smaller, tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose line
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)
    • Used in coolant, water and air applications and approved for marine applications

    Quick facts

    • Part: Gates 18763 heater hose
    • Also called: HVAC heater hose
    • Fits: 1996-1997 Ford Vagoneta truck and other vehicles
    • Position: Heater to water pump
    • Material: EPDM
    • Condition: New

    A leaking heater core, a worn clamp or a weeping water pump can also be behind coolant loss or weak cabin heat, so find the source before you buy a hose. A hose that is cracked, swollen or stained with coolant can be the culprit; look it over with the engine cool. The heater-to-water-pump run takes one hose.

    Fits

    This is a heater hose for the 1991-1996 Ford Escort 4-cylinder 1.9L, and it also fits the 1991-1996 Mercury Tracer 4-cylinder 1.9L and the 1996-1997 Ford Vagoneta truck.

    Specifications

    Fit and size

    • Position: heater to water pump
    • Quantity per vehicle: 1
    • Centerline length: 23.5 in (597 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.85 in (22 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use for fuel or oil transfer applications.

    Interchange: F0EE 18C266 AE · F1CZ 18472 B · F5CZ 18C266 AA
    18036L · 86062 · 87643 · E86062 · E87643 · 4323 · 63057 · 10763

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18036L, 18763, 86062, 87643, E86062, E87643, F0EE 18C266 AE, F1CZ 18472 B, F5CZ 18C266 AA, 4323, 63057, 10763

    Frequently Asked Questions

    Does this Gates heater hose fit the 1991-1996 Ford Escort 4-cylinder 1.9L?

    Yes. Gates 18763 fits the 1991-1996 Ford Escort 4-cylinder 1.9L and runs from the heater to the water pump.

    What size are the ends on this heater hose?

    End 1 has a 0.62 in (16 mm) inside diameter and End 2 has a 0.85 in (22 mm) inside diameter. Centerline length is 23.5 in (597 mm).

    What is the Gates 18763 hose made of and what temperatures can it handle?

    Gates 18763 has an EPDM tube and EPDM cover with synthetic fiber knit reinforcement. Its temperature range is -40°F to 275°F (-40°C to 135°C).

    Can this molded hose be used for fuel or oil lines?

    No. Do not use it for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine applications.

    Should I replace the hose clamps when installing this heater hose?

    Yes. A new coolant hose goes in with new hose clamps, and that includes this Gates 18763 heater hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review