Heater Hose for 2000-2002 Ford Taurus & More - Gates 18831

$9.99

Vehicles this part fits

    Part number: 18831
    UPC: 072053180381
    Condition: New
    Weight: 0.57 LBS
    Item Package Quantity: 1
    $9.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18831
    Gates HVAC Heater Hose P/N:18831
    $9.99
    $9.99

    Gates 18831 heater hose for the 2000-2002 Ford Taurus V6 3.0L and other vehicles carries coolant in the heater circuit. Also called an HVAC heater hose, this Gates heater hose is factory-molded in an OEM style to fit today's smaller, tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose line, for coolant, water and air applications
    • Approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 18831 heater hose
    • Also called: HVAC heater hose
    • Fits: 2000-2002 Ford Taurus V6 3.0L and other vehicles
    • Position: heater to intake manifold, pipe-2 to thermostat
    • Material: EPDM
    • Condition: New

    A heater hose that is cracked, swollen, soft or weeping coolant can show up as coolant loss, a low coolant level or weak cabin heat. A leaking clamp, a worn thermostat or a failing water pump can be behind those signs too, so find the cause before you buy a hose. Look only with the engine off and cool.

    Fits

    This molded heater hose fits the 2000-2002 Ford Taurus V6 3.0L, the 2002 Mercury Sable V6 3.0L and the 2000 Ford Sable and the 2001 Sable V6 3.0L, and each takes one. If your car is not named here, look it up by year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: heater to intake manifold, pipe-2 to thermostat
    • Quantity per vehicle: 1
    • Centerline length: 16.6 in (422 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.62 in (16 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Cover: EPDM
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: XF1H 18K579 AA
    16067M · 87680 · E87680 · 10040606 · 63127 · 10831

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16067M, 18831, 87680, E87680, XF1H 18K579 AA, 10040606, 63127, 10831

    Frequently Asked Questions

    Is this Taurus heater hose right for the 2000-2002 Ford Taurus V6 3.0L?

    Yes. Gates 18831 fits the 2000-2002 Ford Taurus V6 3.0L, one hose per car. For other cars, look up your year and engine in the "Vehicles it fits" section.

    What is the temperature range of this Gates molded heater hose?

    Gates 18831 is rated from -40 °F to 275 °F (-40 °C to 135 °C). It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    What are the length and inside diameter of this molded heater hose?

    The centerline length is 16.6 in (422 mm). Both ends have a 0.62 in (16 mm) inside diameter.

    Can this heater hose be used for fuel or oil lines?

    No. This hose is for coolant, water and air applications and is approved for marine use. It is not for fuel or oil transfer.

    Should I replace the clamps when I install a new heater hose?

    Yes. Replace the hose clamps each time a new coolant hose is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review