Gates HVAC Heater Hose P/N:18460
Gates 19046 heater hose for the 1997 Honda CR-V 4-cylinder 2.0L carries engine coolant for the heating system. Also called an HVAC heater hose, this Gates heater hose is factory-molded and OEM style.
A cracked or swollen hose, or coolant drips and stains near the hose, can mean it is worn. Before you replace it, rule out a loose clamp or a leaking fitting at either end, since those can leave drips of their own.
This heater hose is a direct-fit replacement for the 1997 Honda CR-V 4-cylinder 2.0L.
Fit and size
Build and materials
One heater hose. This listing holds one hose, and the 1997 Honda CR-V 4-cylinder 2.0L takes one.
Interchange: 18105L · 79721S10K00 · 11046
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 19046 heater hose fit the 1997 Honda CR-V 4-cylinder 2.0L?
Yes. Gates 19046 is a direct-fit replacement for the 1997 Honda CR-V 4-cylinder 2.0L, running from the valve to the intake manifold.
What is this Gates molded heater hose made of?
Gates 19046 has an EPDM tube and cover with a synthetic fiber knit reinforcement. It handles -40°F to 275°F (-40°C to 135°C).
How long is this heater hose and what is its inside diameter?
The hose measures 20 in (508 mm) along the centerline. Both ends have a 0.63 in (16 mm) inside diameter.
Can this heater hose be used for fuel or oil lines?
No. It is made for coolant, water and air applications and is approved for marine use. Do not use it to transfer fuel or oil.
Should I replace the hose clamps when I install this heater hose?
Yes. Replace the hose clamps each time a new heater hose goes on.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.