Heater Hose for 2002 Ford Cougar truck & More - Gates 19101

$39.99

Vehicles this part fits

    Part number: 19101
    UPC: 072053456042
    Condition: New
    Weight: 3.74 LBS
    Item Package Quantity: 1
    $39.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19101
    Gates HVAC Heater Hose P/N:19101
    $39.99
    $39.99

    Gates 19101 heater hose for the 2002 Ford Cougar truck and other vehicles carries hot engine coolant through the heater circuit. This Gates heater hose is molded at the factory to route in smaller, tighter engine compartments.

    • Gates Small I.D. Molded Coolant Hose product line
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Used for coolant, water and air applications, and approved for marine use

    Quick facts

    • Part: Gates 19101 heater hose
    • Also called: HVAC heater hose
    • Fits: 2002 Ford Cougar truck and other vehicles
    • Position: Connector to water pump
    • Material: EPDM
    • Condition: New

    A worn heater hose can show cracks, swelling or coolant residue at its ends. A thermostat housing, the water pump or a loose clamp can be behind coolant loss or weak heater output too, so find the cause before you buy a hose.

    Fits

    The 2002 Ford Cougar truck, the 1999-2002 Mercury Cougar V6 2.5L and the 1995-1997 Ford Mystique V6 2.5L take this hose, along with other vehicles. Order one hose per car, and open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: Connector to water pump
    • Quantity per vehicle: 1
    • Centerline length: 29.2 in (742 mm)
    • End 1 inside diameter: 0.63 in (16 mm)
    • End 2 inside diameter: 0.75 in (19 mm)

    Build and materials

    • Material: EPDM
    • Construction: Molded
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new heater hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: F5RZ 18472 C · F8RZ 18472 GA
    16325M · 87745 · E87745 · 63511 · 11101

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16325M, 19101, 87745, E87745, F5RZ 18472 C, F8RZ 18472 GA, 63511, 11101

    Frequently Asked Questions

    Will the Gates 19101 heater hose fit a 1999-2002 Mercury Cougar V6 2.5L?

    Yes. Gates 19101 fits the 1999-2002 Mercury Cougar V6 2.5L, and the car takes one hose. It is the connector-to-water-pump hose.

    Does this Gates 3/4 heater hose have the same size on both ends?

    No. One end of Gates 19101 has a 0.75 in (19 mm) inside diameter, the 3/4 inch end, and the other end is 0.63 in (16 mm). The centerline length is 29.2 in (742 mm).

    Is this HVAC heater hose rated for fuel or oil lines?

    No. This hose is for coolant, water and air applications, and it is not for fuel or oil transfer.

    What should I look for on this EPDM heater hose when it is wearing out?

    With the engine off and cool, look for cracks, swelling or soft spots along the hose. These signs can mean the hose needs replacing.

    Do I need new clamps with this Gates molded heater hose?

    Yes. Replace the hose clamps each time a new heater hose such as the Gates 19101 is installed.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review