Heater Hose for 2004-2006 Jeep Wrangler & More - Gates 19126

$58.99

Vehicles this part fits

    Part number: 19126
    UPC: 072053467147
    Condition: New
    Weight: 3.35 LBS
    Item Package Quantity: 1
    $58.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19126
    Gates HVAC Heater Hose P/N:19126
    $58.99
    $58.99

    Gates 19126 heater hose for the 2004-2006 Jeep Wrangler 6-cylinder 4.0L and other vehicles carries hot engine coolant to and from the heater. This Gates molded heater hose, also called an HVAC heater hose, connects the heater to the thermostat or the tee.

    • Gates Small I.D. Molded Coolant Hose, factory-molded for smaller, tighter engine compartments
    • Used for coolant, water and air applications and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 19126 heater hose
    • Also called: HVAC heater hose
    • Fits: 2004-2006 Jeep Wrangler 6-cylinder 4.0L and other vehicles
    • Position: Heater to thermostat, heater to tee
    • Material: EPDM
    • Condition: New

    A hose that has gone soft or cracked, or coolant leaking near the heater connections, can mean the hose is worn. These signs alone do not prove the hose is at fault, since a loose clamp can leak in much the same way.

    Fits

    The vehicles it fits include the 2004-2006 Jeep Wrangler 6-cylinder 4.0L, the 2004-2006 Jeep TJ 6-cylinder 4.0L and the 1994-1996 Cadillac Commercial Chassis V8 5.7L, and each takes one hose. If your car is not named here, look up its year, model and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: heater to thermostat, heater to tee
    • Quantity per vehicle: 1
    • Centerline length: 28.4 in (721 mm)
    • End 1 inside diameter: 0.59 in (15 mm)
    • End 2 inside diameter: 0.72 in (18 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40°F to 275°F (-40°C to 135°C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose goes on.
    • Not for fuel or oil transfer applications.

    Interchange: 18252L · 55038223AC · F10047 · 10247515 · 10256545 · 11126

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18252L, 19126, 55038223AC, F10047, 10247515, 10256545, 11126

    Frequently Asked Questions

    Is this a Jeep Wrangler heater hose for 2004-2006 models with the 6-cylinder 4.0L?

    Yes. Gates 19126 fits the 2004-2006 Jeep Wrangler 6-cylinder 4.0L, one hose per vehicle. For another car, look it up in the "Vehicles it fits" section.

    Will the Gates 19126 work as a Jeep TJ heater hose on 2004-2006 models with the 6-cylinder 4.0L?

    Yes. This Gates 19126 hose fits the 2004-2006 Jeep TJ 6-cylinder 4.0L, and that vehicle takes one.

    What size are the ends on this heater hose?

    End 1 has a 15 mm (0.59 in) inside diameter and end 2 has 18 mm (0.72 in). The centerline length is 721 mm (28.4 in).

    What temperature range does the Gates 19126 heater hose handle?

    It handles -40°F to 275°F (-40°C to 135°C). The hose is EPDM with synthetic fiber knit reinforcement and meets SAE 20R3 Type EC Class D-1 and D-2.

    Does the Gates 19126 replace number 55038223AC?

    Yes. Gates 19126 is listed as a replacement for 55038223AC, along with 18252L, F10047, 10247515, 10256545 and 11126.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review