Heater Hose for 1995 Chevrolet Blazer & More - Gates 19224

$26.99

Vehicles this part fits

    Part number: 19224
    UPC: 072053561951
    Condition: New
    Weight: 0.94 LBS
    Item Package Quantity: 1
    $26.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19224
    Gates HVAC Heater Hose P/N:19224
    $26.99
    $26.99

    Gates 19224 heater hose for the 1995 Chevrolet Blazer V6 4.3L and other vehicles carries engine coolant between the heater and the engine. Also called an HVAC heater hose, this Gates heater hose is molded to shape at the factory.

    • Part of the Gates Small I.D. Molded Coolant Hose line, sized for smaller, tighter engine compartments
    • Used for coolant, water and air applications and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19224 heater hose
    • Also called: HVAC heater hose
    • Fits: 1995 Chevrolet Blazer V6 4.3L and other vehicles
    • Position: Heater to engine
    • Material: EPDM
    • Condition: New

    Cracks, a soft or swollen spot, or coolant seepage near an end can mean a heater hose is wearing out; look only when the engine is cool. Before you replace the hose, rule out a loose clamp or a leak elsewhere in the heater circuit, since a drip at the hose end can start somewhere else.

    Fits

    The 1995 Chevrolet Blazer V6 4.3L, the 1994-1995 Chevrolet S10 V6 4.3L and the 1995 GMC Jimmy V6 4.3L are among the vehicles this hose fits. The fitment calls for one hose per vehicle.

    Specifications

    Fit and size

    • Position: Heater to engine
    • Quantity per vehicle: 1
    • Centerline length: 21.2 in (538 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.74 in (19 mm)

    Build and materials

    • Construction: Molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps whenever a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 18214L · 86114 · E86114 · 15668786 · 64111 · 11224

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18214L, 19224, 86114, E86114, 15668786, 64111, 11224

    Frequently Asked Questions

    Is this the right S10 heater hose for a 1994-1995 Chevrolet S10 V6 4.3L?

    Yes. Gates 19224 fits the 1994-1995 Chevrolet S10 V6 4.3L with one hose per vehicle; if your car is not named here, look for it in the "Vehicles it fits" section.

    Is the Gates molded heater hose approved for marine use?

    Yes, Gates 19224 is approved for marine applications and for coolant, water and air use. It is not for fuel or oil transfer.

    What are the inside diameters and length of this heater hose?

    This heater hose has a 16 mm (0.62 in) inside diameter at end 1 and 19 mm (0.74 in) at end 2, with a 538 mm (21.2 in) centerline length.

    What does a worn EPDM heater hose look like?

    Cracks, a soft or swollen spot or coolant seepage near an end can mean the hose is wearing out. Check only with the engine off and cool.

    Should I replace the clamps when installing this heater hose?

    Yes. New hose clamps go on whenever a new coolant hose is installed, so plan on fresh clamps with Gates 19224.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review