Heater Hose for 2009-2012 Toyota RAV4 - Gates 19582

$25.99

Vehicles this part fits

    Part number: 19582
    UPC: 770075467618
    Condition: New
    Weight: 0.95 LBS
    Item Package Quantity: 1
    $25.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19582
    Gates HVAC Heater Hose P/N:19582
    $25.99
    $25.99

    Gates 19582 heater hose for the 2009-2012 Toyota RAV4 4-cylinder 2.5L carries engine coolant between the engine and the cabin heater. This Gates molded heater hose is a single factory-molded piece for the heater outlet position.

    • Gates Small I.D. Molded Coolant Hose, factory-molded for today's smaller, tighter engine compartments
    • Used for coolant, water and air applications, and also approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19582 heater hose
    • Also called: HVAC heater hose
    • Fits: 2009-2012 Toyota RAV4 4-cylinder 2.5L
    • Position: Heater outlet
    • Material: EPDM
    • Condition: New

    A worn or failing heater hose can show up as coolant drips or stains near the hose, a cracked, swollen or soft cover, or a cabin heater that blows weak. A weak heater has other possible sources too, so look for the cause before swapping the hose. With the engine off and cool, check the hose and its ends for cracks, bulges and wet spots, and leave pressure or running tests to a shop.

    Fits

    It fits the 2009-2012 Toyota RAV4 4-cylinder 2.5L, which takes one hose, and this listing is a single hose.

    Specifications

    Fit and size

    • Position: heater outlet
    • Quantity per vehicle: 1
    • Centerline length: 20.5 in (521 mm)
    • End 1 inside diameter: 0.63 in (16 mm)
    • End 2 inside diameter: 0.63 in (16 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Reinforcement: synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16517M · 64579 · C90990 · E87951 · 87951 · 11582 · 8724542410

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16517M, 19582, 64579, C90990, E87951, 87951, 11582, 8724542410

    Frequently Asked Questions

    Does the Gates 19582 fit the 2009-2012 Toyota RAV4 4-cylinder 2.5L?

    Yes. Gates 19582 is listed for the 2009-2012 Toyota RAV4 4-cylinder 2.5L, which takes one hose in the heater outlet position.

    Is this Gates heater hose okay for fuel or oil lines?

    No. Gates 19582 is made for coolant, water and air applications and is not for fuel or oil transfer.

    What size is this HVAC heater hose?

    Both ends of this heater hose have a 0.63 in (16 mm) inside diameter, and the centerline length is 20.5 in (521 mm).

    What is this hose made of and what temperatures can it take?

    The tube and cover are EPDM, with synthetic fiber knit reinforcement. It covers -40 °F to 275 °F (-40 °C to 135 °C) and meets SAE 20R3 Type EC Class D-1 and D-2.

    Can this hose be used on a boat?

    Yes. This heater hose is also approved for marine applications, in addition to coolant, water and air use.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review