Heater Hose for 2004-2006 Chevrolet Silverado 1500 & More - Gates 19623

$15.99

Vehicles this part fits

    Part number: 19623
    UPC: 072053178555
    Condition: New
    Weight: 0.80 LBS
    Item Package Quantity: 1
    $15.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19623
    Gates HVAC Heater Hose P/N:19623
    $15.99
    $15.99

    Gates 19623 heater hose for the 2004-2006 Chevrolet Silverado 1500 V8 5.3L and other vehicles carries engine coolant through the heater circuit.

    • Gates molded heater hose from the ThermalPro Premium line, shaped for smaller, tighter engine compartments
    • Used for coolant, water and air, and approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19623 heater hose
    • Also called: HVAC heater hose
    • Fits: 2004-2006 Chevrolet Silverado 1500 V8 5.3L and other vehicles
    • Position: heater to engine, heater to pipe-1, tee-2 to heater, heater to pipe, heater to pipe-2, heater to tee-2, auxiliary water pump-2 to pipe-4
    • Material: EPDM
    • Condition: New

    A leaking, cracked or swollen heater hose can show up as coolant drips or a coolant level that keeps dropping. A loose hose clamp, a leaking heater core or a worn water pump can also be behind coolant loss, so find the cause before you buy a hose. Some shops list this part as an HVAC heater hose.

    Fits

    This hose is listed for a wide range of Chevrolet, GMC, Cadillac, Ford and Mercury models, led by the 2004-2006 Chevrolet Silverado 1500 V8 5.3L, the 2005-2006 GMC Sierra 1500 V8 5.3L and the 2007 Chevrolet Silverado 1500 Classic V8 5.3L. If your car is not named here, look it up in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: heater to engine, heater to pipe-1, tee-2 to heater, heater to pipe, heater to pipe-2, heater to tee-2, auxiliary water pump-2 to pipe-4
    • Quantity per vehicle: 1
    • Centerline length: 17.5 in (445 mm)
    • Inside diameter, both ends: 0.75 in (19 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Specification: SAE 20R3 Type EC Class D-1 and D-2
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. The vehicles it fits take one.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: E3FZ 18472 A · E3FZ 19472 A
    16148M · 63173 · 88369 · D88369 · 10378156 · 1639230 · 11623

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16148M, 19623, 63173, 88369, D88369, E3FZ 18472 A, E3FZ 19472 A, 10378156, 1639230, 11623

    Frequently Asked Questions

    Is this GMC Sierra 1500 heater hose right for the 2005-2006 GMC Sierra 1500 V8 5.3L?

    Yes. Gates 19623 is listed for the 2005-2006 GMC Sierra 1500 V8 5.3L and the 2004-2006 Chevrolet Silverado 1500 V8 5.3L. For other cars, look in the "Vehicles it fits" section.

    What are the sizes of this Gates 3/4 heater hose?

    Gates 19623 has a 0.75 in (19 mm) inside diameter at both ends and a centerline length of 17.5 in (445 mm).

    Can this molded heater hose carry fuel or oil?

    No. This hose is for coolant, water and air applications and is approved for marine use. It must not be used for fuel or oil transfer.

    What is this heater hose made of, and what temperatures can it handle?

    The tube and cover are EPDM, with a synthetic fiber knit reinforcement. The temperature range is -40 °F to 275 °F (-40 °C to 135 °C).

    Should I replace the hose clamps when installing this heater hose?

    Yes. Replace the hose clamps each time a new coolant hose goes on, rather than reusing the old ones.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review