Gates 19628 heater hose for the 1995 Nissan Maxima V6 3.0L and other vehicles carries hot coolant through the heater circuit. This Gates heater hose is molded to fit today's smaller, tighter engine compartments.
- Part of the Gates Small I.D. Molded Coolant Hose line, with that line's quality features
- EPDM tube, synthetic fiber knit reinforcement and EPDM cover
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature range: -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C)
- Used for coolant, water and air applications, and approved for marine applications
Quick facts
- Part: Gates 19628 heater hose
- Also called: HVAC heater hose
- Fits: 1995 Nissan Maxima V6 3.0L and other vehicles
- Position: Heater to valve, heater to pipe-1
- Material: EPDM
- Condition: New
Coolant drips at the hose, a soft, swollen or cracked hose, or weak cabin heat can mean this hose is worn, though a low coolant level or a clogged heater core can be behind the same signs. With the engine off and cool, you can look the hose over for cracks and wet spots.
Fits
Vehicles this hose fits include the 1989-1997 Ford Thunderbird V6 3.8L and the 1989-1997 Mercury Cougar V6 3.8L. If your car is not one of those, find its year and engine in the "Vehicles it fits" section. This listing is a single hose, and the fitment calls for one per vehicle.
Specifications
Fit and size
- Position: Heater to valve, heater to pipe-1
- Quantity per vehicle: 1
- Centerline length: 19 in (483 mm)
- End 1 inside diameter: 0.75 in (19 mm)
- End 2 inside diameter: 0.75 in (19 mm)
- Branch quantity: 0, quick connect fitting quantity: 0
Build and materials
- Construction: Molded
- Material: EPDM
- Condition: New
- Country of origin: United States
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer applications.
Interchange: E4SZ 18472 A · E9SH 18D359 A · E9SZ 18472 B · F4SZ 18472 A
16151M · 63054 · 9240140U00 · 9240140U01 · 9240240U00 · 86025 · 86068 · 88373 · 88400 · C86068 · F10871 · 4320 · 11628
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
16151M, 19628, 63054, 9240140U00, 9240140U01, 9240240U00, 86025, 86068, 88373, 88400, C86068, F10871, E4SZ 18472 A, E9SH 18D359 A, E9SZ 18472 B, F4SZ 18472 A, 4320, 11628
Frequently Asked Questions
Does the Gates 19628 hose fit the 1995 Nissan Maxima V6 3.0L?
Yes. Gates 19628 is listed for the 1995 Nissan Maxima V6 3.0L and also the 1989-1997 Ford Thunderbird V6 3.8L. For other cars, look in the "Vehicles it fits" section.
Is this a Gates 3/4 heater hose?
Yes. Gates 19628 has a 0.75 in (19 mm) inside diameter at both ends and a centerline length of 19 in (483 mm).
What is the Gates molded heater hose made of?
This hose has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.
Can this HVAC heater hose be used on a boat?
Yes. The hose is approved for marine applications, and it can also be used for coolant, water and air applications.
Do I need new clamps with this heater hose?
Yes, plan on new hose clamps. They should be replaced each time a new coolant hose is installed.
