Gates HVAC Heater Hose P/N:18460
Gates 19658 heater hose for the 2008-2010 Chevrolet Cobalt 4-cylinder 2.0L and other vehicles carries coolant through the heater circuit. You may also see it listed as an HVAC heater hose, and this Gates molded heater hose is sold as a single hose.
A coolant leak, a bulging or cracked hose, or weak cabin heat can mean a heater hose is wearing out. A loose clamp, a leaking heater core or a neighboring coolant hose can show up the same way, so trace the source before you buy a replacement. Check hoses only with the engine off and cool.
The 19658 is an OEM-style molded hose listed for a wide range of Cadillac, Chevrolet, Saturn and other models, led by the 2008-2010 Chevrolet Cobalt 4-cylinder 2.0L, the 2006-2007 Saturn Ion 4-cylinder 2.4L and the 1998-2005 Cadillac DeVille V8 4.6L. Each hose position calls for a single hose, and this listing is one hose. Driving something else? Look up your year, make and model in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: F3XY 18472 D · F3XY 18472 Q
14184S · 924000B010 · 924010B010 · F10873 · 22728090 · 25610967 · 25630277 · 25668355 · 25793833 · 11658
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates 19658 a Cadillac DeVille heater hose for 1998-2005 cars with the V8 4.6L?
Yes. Gates 19658 is listed for the 1998-2005 Cadillac DeVille V8 4.6L with one hose per application, and the "Vehicles it fits" section covers other cars.
What are the inside diameter and length of the Gates 19658?
Both ends of the Gates 19658 have an 18 mm (0.72 in) inside diameter. The centerline length is 173 mm (6.8 in).
What temperature range does this EPDM heater hose handle?
This hose is rated from -40 Deg. F to 275 Deg. F (-40 Deg. C to 135 Deg. C). It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
What should I look for on a Gates heater hose with the engine cool?
Look for cracks, bulges, soft spots or coolant residue at the hose ends. Coolant loss or weak cabin heat while driving can also point to a worn hose.
Can I use this Gates 19658 hose for fuel or oil lines?
No. This hose is for coolant, water and air applications, plus marine use, not for fuel or oil transfer, and Gates recommends new hose clamps with each new coolant hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.