Heater Hose for 1995-1999 Nissan Maxima & More - Gates 19755

$67.99

Vehicles this part fits

    Part number: 19755
    UPC: 072053554069
    Condition: New
    Weight: 4.32 LBS
    Item Package Quantity: 1
    $67.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19755
    Gates HVAC Heater Hose P/N:19755
    $67.99
    $67.99

    Gates 19755 heater hose for the 1995-1999 Nissan Maxima V6 3.0L and other vehicles carries engine coolant through the heater circuit. This Gates molded heater hose has the quality features of the brand's molded coolant hose and is similar to OEM specifications.

    • Factory-molded shape made for smaller, tighter engine compartments
    • Can be used for coolant, water and air applications, and is also approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)

    Quick facts

    • Part: Gates 19755 heater hose
    • Also called: HVAC heater hose
    • Fits: 1995-1999 Nissan Maxima V6 3.0L and other vehicles
    • Position: Heater to pipe-2, heater to tee-1
    • Material: EPDM
    • Condition: New

    Cracks, soft or swollen spots, or coolant seepage along the hose can mean it is due for replacement. A leaking heater core, a loose clamp or a failing water pump can be behind coolant loss and weak cabin heat too, so find the cause before buying a hose. Inspect the hose only with the engine off and cool.

    Fits

    It fits the 1995-1999 Nissan Maxima V6 3.0L and the 1996-1999 Infiniti I30 V6 3.0L. This listing is one hose, and the V6 3.0L takes one.

    Specifications

    Fit and size

    • Position: heater to pipe-2, heater to tee-1
    • Centerline length: 34.6 in (879 mm)
    • End 1 inside diameter: 0.75 in (19 mm)
    • End 2 inside diameter: 0.75 in (19 mm)
    • Quantity per application: 1

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Reinforcement: synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose goes on.
    • Not for fuel or oil transfer applications.

    Interchange: 18162L · 9241040U00 · 88401 · B88401 · 11755

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18162L, 19755, 9241040U00, 88401, B88401, 11755

    Frequently Asked Questions

    Is the Gates 19755 heater hose right for the 1996-1999 Infiniti I30 V6 3.0L?

    Yes. Gates 19755 is listed for the 1996-1999 Infiniti I30 V6 3.0L and the 1995-1999 Nissan Maxima V6 3.0L.

    What size is this Gates 3/4 heater hose?

    Both ends have a 0.75 in (19 mm) inside diameter, and the centerline length is 34.6 in (879 mm).

    What is this Gates heater hose made of?

    Gates 19755 has an EPDM tube and an EPDM cover over a synthetic fiber knit reinforcement. It meets SAE 20R3 Type EC Class D-1 and D-2.

    Can this HVAC heater hose be used for fuel or oil lines?

    No. It is for coolant, water and air applications, and is also approved for marine use. Do not use it for fuel or oil transfer.

    Should I put new hose clamps on with this heater hose?

    Yes. A fresh coolant hose should go on with new clamps rather than the old ones.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review