Gates HVAC Heater Hose P/N:19057
Gates 19999 heater hose for the 2013-2019 Nissan Sentra 4-cylinder 1.8L carries engine coolant to and from the cabin heater. It runs at the heater outlet and is sold as a single hose.
A soft, bulging or cracked hose, damp spots at the hose ends or a heater that blows cold can mean a heater hose is wearing out. A leaking clamp, a worn heater core, a weak water pump or a faulty thermostat can cause those signs as well, so find the cause before buying a hose.
It is a direct-fit heater hose for the 2013-2019 Nissan Sentra 4-cylinder 1.8L, which takes one at the heater outlet.
Fit and size
Build and materials
One heater hose.
Interchange: 924103SG0A · F10929 · R41180
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 19999 hose fit the 2013-2019 Nissan Sentra 4-cylinder 1.8L?
Yes. Gates 19999 is a direct-fit heater hose for the 2013-2019 Nissan Sentra 4-cylinder 1.8L, and it goes on the heater outlet.
What size is this Gates 3/4 heater hose?
Gates 19999 has a 0.75 in (19 mm) inside diameter at both ends and a centerline length of 16.3 in (414 mm).
Is this Gates molded heater hose made of EPDM?
Yes. Gates 19999 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.
Can this Gates HVAC heater hose be used for fuel or oil lines?
No. This hose is for coolant, water and air applications, and it is not meant for fuel or oil transfer.
Should I replace the clamps when fitting this heater hose?
Yes. Use new hose clamps whenever a new coolant hose is installed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.