Gates HVAC Heater Hose P/N:12507
Gates 28445 heater hose for the 2013 Ford F-650 V10 6.8L carries engine coolant to and from the heater system. This Gates Green Stripe heater hose is a straight length, not a molded one.
A cracked, hardened or swollen hose, or coolant seepage along its length, can mean it is due for replacement. A leaking clamp, the heater core, the water pump or the thermostat can also be behind coolant loss or weak cabin heat, so track down the source before you buy a hose.
It fits the 2013 Ford F-650 V10 6.8L, which takes one.
Fit and size
Build and materials
Interchange: 6E7Z 18472 BA
30165 · 65037 · H134 · 83946457 · 162001140
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 28445 heater hose fit the 2013 Ford F-650 V10 6.8L?
Yes. Gates 28445 is listed for the 2013 Ford F-650 V10 6.8L, which takes one.
Is this a Gates molded heater hose?
No. Gates 28445 is a straight hose, not a molded one, with the same 1.25 in (31.7 mm) inside diameter at both ends.
What temperature range does the Green Stripe Heavy-Duty hose handle?
This EPDM hose is rated from -40°F to +275°F (-40°C to +135°C), with a working pressure of 70 psi.
Can I use this HVAC heater hose for fuel or oil lines?
No. Do not use it for fuel or oil transfer applications; Gates 28445 is made for heater systems.
Which clamps suit a maintenance-free connection on this hose?
Use PowerGrip SB clamps for a maintenance-free connection with this hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.