Heater Hose for 2013-2019 Cadillac ATS - Gates 51511

$76.99

Vehicles this part fits

    Part number: 51511
    UPC: 770075781196
    Condition: New
    Weight: 4.83 LBS
    Item Package Quantity: 1
    $76.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:51511
    Gates HVAC Heater Hose P/N:51511
    $76.99
    $76.99

    Keep hot coolant flowing to the cabin heat with the Gates heater hose 51511, a modular coolant hose that drops in as a direct-fit replacement for the 2013-2019 Cadillac ATS. Cataloged for the heater-to-thermostat and heater-outlet position, this Gates hvac heater hose carries engine coolant through the heater circuit and is built from application-specific materials rather than bulk stock.

    • Modular construction: EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical-coolant-resistant EPDM cover.
    • OEM-exact components: manufactured with the integrated hose components an application needs — quick connects, branch connectors/tees, sensors, restrictors and the like.
    • Built to resist failure: specifically-engineered materials resist collapse under vacuum and are engineered to resist electrochemical degradation, a leading cause of hose failure.
    • Rated: meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID and SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over; temperature range -40°F to +257°F.

    Gates recommends replacing the clamps each time a new coolant hose is installed. Do not use for fuel or oil transfer applications.

    Interchange: 27438X · F10385 · 22908203

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    27438X, F10385, 22908203, 51511

    Frequently Asked Questions

    What vehicles does the Gates 51511 heater hose fit?

    It is a direct-fit replacement for the 2013-2019 Cadillac ATS. Check the "Vehicles it fits" section to confirm the correct engine application for your vehicle.

    Where is this hose located on the engine?

    It is cataloged for the heater-to-thermostat and heater-outlet position, carrying engine coolant through the heater circuit.

    What is this Gates hvac heater hose made of?

    It uses an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical-coolant-resistant EPDM cover, with OEM-exact integrated components such as quick connects and branch connectors.

    What temperature and standards does it meet?

    It meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID and SAE 20R4 EC Class D1 for 25mm and over, with a temperature range of -40°F to +257°F.

    Should I reuse the old hose clamps?

    Gates recommends installing new clamps each time a coolant hose is replaced. Do not use this hose for fuel or oil transfer applications.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review