Heater Hose for 2004-2007 BMW X3 - Gates 51618

$50.99

Vehicles this part fits

    Part number: 51618
    UPC: 770075805656
    Condition: New
    Weight: 3.45 LBS
    Item Package Quantity: 1
    $50.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:51618
    Gates HVAC Heater Hose P/N:51618
    $50.99
    $50.99

    Keep coolant flowing to the heater core and the cabin warming as designed with the Gates heater hose 51618, a Premium Modular Coolant Hose built for the 2004-2007 BMW X3. This modular assembly is manufactured to fit the specific application at the heater outlet, integrating OE-style components — quick connects, branch connectors/tees, sensors and the like — the way the factory hose does.

    • EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
    • Collapse-resistant: specifically-engineered materials resist collapse under vacuum.
    • Resists electrochemical degradation: engineered to address the leading cause of hose failure.
    • Rated spec: meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID and SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over; temperature range -40°F to +257°F (-40°C to +125°C).

    As an hvac heater hose, it manages coolant flow between the engine and the heater circuit; do not use it for fuel or oil transfer applications. Gates recommends installing new clamps whenever a coolant hose is replaced.

    Interchange: 27429X · 64213400417 · F11257 · R19463 · CHH0515

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    27429X, 64213400417, F11257, 51618, R19463, CHH0515

    Frequently Asked Questions

    What vehicles does the Gates 51618 heater hose fit?

    It is built for the 2004-2007 BMW X3. Check the "Vehicles it fits" section to confirm the exact application for your vehicle.

    What is this Gates heater hose made of?

    It uses an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.

    Where does this hose fit on the vehicle?

    It serves the heater outlet position, routing coolant through the heater circuit.

    Should I reuse the old hose clamps?

    Gates recommends installing new clamps whenever a coolant hose is replaced, so plan to fit fresh clamps during installation.

    Can I use this hose for fuel or oil lines?

    No. This is a coolant hose; do not use it for fuel or oil transfer applications.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review