Heater Hose for 2003-2007 Hummer H2 - Gates 51746

$105.99
Sold out

Vehicles this part fits

    Part number: 51746
    UPC: 770075800712
    Condition: New
    Weight: 16.12 LBS
    Item Package Quantity: 1
    $105.99

    Out of stock

    Have questions?

    Gates HVAC Heater Hose P/N:51746
    Gates HVAC Heater Hose P/N:51746
    $105.99
    $105.99

    Gates 51746 heater hose for the 2003-2007 Hummer H2 V8 6.0L carries engine coolant from the thermostat to the heater. It is a modular assembly with a branch and a female quick connector already in place.

    • Gates Modular Coolant Hose line, made for specific applications
    • EPDM tube with synthetic fiber knit reinforcement
    • Heat-, ozone- and chemical coolant-resistant EPDM cover
    • Materials engineered to resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Temperature range of -40°F to +257°F (-40°C to +125°C)

    Quick facts

    • Part: Gates 51746 heater hose
    • Also called: HVAC heater hose
    • Fits: 2003-2007 Hummer H2 V8 6.0L
    • Position: Thermostat to heater
    • Material: EPDM, plastic
    • Condition: New

    Coolant seepage at the hose or quick connector, a falling coolant level or a heater that blows cool air can mean a heater hose is wearing out. Other parts can also cause a leak or a weak heater, so with the engine off and cool, look the hose over for cracks, soft or swollen spots and wet residue before you replace it.

    Fits

    Gates 51746 is a direct-fit replacement for the 2003-2007 Hummer H2 V8 6.0L, and the vehicle takes one.

    Specifications

    Fit and size

    • Position: thermostat to heater
    • Quantity per vehicle: 1
    • End 1 inside diameter: 15 mm (0.6 in)
    • End 2 inside diameter: 19 mm (0.75 in)
    • End 3 inside diameter: 1 in
    • Centerline length: 21.25 in

    Build and materials

    • Construction: molded, modular
    • Material: EPDM, plastic
    • Modular components: one branch, one female quick connector
    • Contains spring: No
    • Standards: SAE 20R3 EC Class D1 under 25 mm (1 in.) ID, SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose with a branch and a female quick connector.

    Installation notes

    • Gates recommends replacing the clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 15058002 · F11286

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    15058002, F11286, 51746

    Frequently Asked Questions

    Does the Gates 51746 heater hose fit the 2003-2007 Hummer H2 V8 6.0L?

    Yes. Gates 51746 is listed for the 2003-2007 Hummer H2 V8 6.0L, which takes one.

    Does the Gates molded heater hose include the branch and quick connector?

    Yes. Gates 51746 comes with one branch and one female quick connector built into the hose.

    Is the Gates 3/4 heater hose size the same at all three ends?

    No. The ends measure 15 mm (0.6 in), 19 mm (0.75 in) and 1 in inside diameter, and the centerline length is 21.25 in.

    Is Gates 51746 an HVAC heater hose?

    Yes. Gates 51746 is a heater hose for the thermostat-to-heater run, with a temperature range of -40°F to +257°F (-40°C to +125°C).

    Does Gates recommend new clamps with this hose?

    Yes, Gates recommends replacing the clamps each time a new coolant hose is installed, and this hose is not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review