Gates HVAC Heater Hose P/N:52098

Be the first to review this product

$59.99

MPN: 52098

UPC: 770075864370

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:52098

$59.99

Description

Keep coolant moving through your truck's climate circuit with the GATES heater hose 52098, a Premium Modular Coolant Hose built as an application-specific, direct-fit replacement for the 2015-2020 Ford F Series Pickup and the Ford F-150 (2015-2016 and 2018-2020). This modular assembly is manufactured for specific applications with OEM-exact integrated components — quick connects, branch connectors/tees, sensors and restrictors — and is cataloged for the auxiliary water pump inlet. As an hvac heater hose, it carries engine coolant through the heater circuit.

EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
Built for the system: specifically-engineered materials resist collapse under vacuum and resist electrochemical degradation, a leading cause of hose failure.
OE-matched components: assembled with OEM-exact hose components for the listed applications.
Rated: meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm (1 in.) ID and over, across a temperature range of -40°F to +257°F (-40°C to +125°C).

Do not use for fuel or oil transfer. Gates recommends replacing the clamps whenever a new coolant hose is installed.

Interchange: FL3Z 8A577 A
FL3Z8A577A · F11387

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

F11387, FL3Z 8A577 A, 52098

Frequently Asked Questions

What vehicles does the GATES 52098 fit?

It's a direct-fit replacement for the 2015-2020 Ford F Series Pickup and the Ford F-150 in 2015-2016 and 2018-2020. See the Buyer's Guide tab to confirm your exact configuration.

Where does this hose install?

It's cataloged for the auxiliary water pump inlet, tying into the coolant circuit with its integrated OE-exact quick connects, branch connectors/tees and sensors.

What is the hose made of?

An EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover, engineered to resist collapse under vacuum and electrochemical degradation.

What ratings does the GATES 52098 meet?

It meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 for 25 mm and over, with a temperature range of -40°F to +257°F (-40°C to +125°C).

Should I reuse the old clamps?

Gates recommends installing new clamps every time a coolant hose is replaced. This hose is for coolant only — never use it for fuel or oil transfer.