Radiator Coolant Hose for 1998-2001 Chevrolet Metro & More - Gates 20157

Gates 20157 radiator coolant hose for the 1998-2001 Chevrolet Metro 4-cylinder 1.3L and other vehicles carries engine coolant between the engine and the radiator. This Gates radiator coolant hose is molded and is listed for upper and lower positions.

• Gates molded coolant hose is pre-shaped to fit and to seal its connections
• Specifically engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• EPDM tube with synthetic fiber knit reinforcement and an EPDM cover that resists heat, ozone and chemical coolant
• Meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances
• Temperature range of -40°F to +257°F (-40°C to +125°C)

Quick facts

• Part: Gates 20157 radiator coolant hose
• Fits: 1998-2001 Chevrolet Metro 4-cylinder 1.3L and other vehicles
• Position: Upper, lower, lower - engine to pipe, lower - pipe to pipe
• Material: EPDM
• Condition: New

A cracked or bulging hose, or coolant seeping near the hose ends, can mean it is worn; look only with the engine off and cool. A loose clamp, a leaking water pump or a faulty radiator cap can lose coolant or overheat the engine too, so find where the problem starts before you buy a hose.

Fits

This hose is listed for a wide range of models from Suzuki, Pontiac, Chevrolet and other makes, led by the 1989-2001 Suzuki Swift 4-cylinder 1.3L and the 1995-2000 Pontiac Firefly 4-cylinder 1.3L. This listing is one hose, and the 1998-2001 Chevrolet Metro 4-cylinder 1.3L takes one. Open the "Vehicles it fits" section to check your exact model and engine.

Specifications

Installation notes

• Replace the hose clamps each time a new coolant hose is installed.
• Not for fuel or oil transfer applications.

Product information is for general reference and may contain errors. See our Disclaimer.