Gates 20597 radiator coolant hose for the 1975-1977 Ford E-250 Econoline V8 7.5L and other vehicles carries engine coolant between the engine and the radiator. This Gates molded coolant hose is pre-shaped to fit, so the connections seal.
- Specifically engineered materials that resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, class D2 and DIN 73411, class A, except for tolerances
Quick facts
- Part: Gates 20597 radiator coolant hose
- Fits: the 1975-1977 Ford E-250 Econoline V8 7.5L and other vehicles
- Position: upper, lower
- Material: EPDM
- Condition: New
Coolant seeping at the hose, a soft or swollen hose, or cracking can mean the hose is worn, though a tired radiator cap or thermostat can sit behind overheating as well, so find the cause before replacing anything.
Fits
As a molded radiator coolant hose, it also fits the 1975-1977 Ford E-250 Econoline Club Wagon V8 7.5L and the 1975-1977 Ford E-350 Econoline V8 7.5L. If your car is not named here, look up its year, make and engine in the "Vehicles it fits" section. This listing is one hose, and one is needed per vehicle.
Specifications
Fit and size
- Position: upper, lower
- Quantity per vehicle: 1
- Centerline length: 21.6 in (549 mm)
- Inside diameter, both ends: 1.5 in (38 mm)
Build and materials
- Construction: molded, no spring
- Material: EPDM
- Reinforcement: synthetic fiber knit
- Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)
- Condition: New
- Country of origin: United States
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Not for fuel or oil transfer applications.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Gates 20597 radiator hose right for the 1975-1977 Ford E-250 Econoline V8 7.5L?
Yes. Gates 20597 is listed for the 1975-1977 Ford E-250 Econoline V8 7.5L, and the "Vehicles it fits" section covers the other vehicles and engines.
Is this Gates lower radiator hose also listed as an upper hose?
Yes. Gates 20597 is listed for both upper and lower positions, and the quantity per vehicle is one.
What is this Gates coolant hose made of?
Gates 20597 has an EPDM tube and an EPDM cover over a synthetic fiber knit reinforcement. Its temperature range is -40 °F to +257 °F (-40 °C to +125 °C).
Is this Gates radiator coolant hose molded or a straight length?
It is molded and pre-shaped to fit. The centerline length is 21.6 in (549 mm), with a 1.5 in (38 mm) inside diameter at both ends.
Should I replace the clamps when I fit this Gates 20597 hose?
Yes. New hose clamps are recommended each time a new coolant hose is installed.
