Upper Radiator Coolant Hose for 1992-1993 Hyundai Sonata & More - Gates 21170

$40.99

Vehicles this part fits

    Part number: 21170
    UPC: 072053055627
    Condition: New
    Weight: 1.40 LBS
    Item Package Quantity: 1
    $40.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:21170
    Gates Radiator Coolant Hose P/N:21170
    $40.99
    $40.99

    Gates 21170 upper radiator coolant hose for the 1992-1993 Hyundai Sonata 4-cylinder 2.0L and other vehicles carries coolant between the engine and the radiator. This Gates molded coolant hose is a new part, sold as a single hose.

    • Materials engineered to resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to seal the connections
    • EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 21170 radiator coolant hose
    • Fits: the 1992-1993 Hyundai Sonata 4-cylinder 2.0L and other vehicles
    • Position: Upper
    • Material: EPDM
    • Condition: New

    A leaking, cracked or swollen hose can mean it is worn, though a faulty thermostat or radiator cap can also be behind coolant loss or overheating, so find the cause before replacing it. Look at the hose only with the engine off and cool.

    Fits

    This is the upper hose for the 1992-1993 Hyundai Sonata 4-cylinder 2.0L, the 1984-1985 Hyundai Pony 4-cylinder 1.6L, the 1984-1987 Pony 4-cylinder 1.4L, the 1986 Pony 4-cylinder 1.5L, the 1987 Pony 4-cylinder 1.6L and the 1979-1984 Mazda B2000 4-cylinder 2.0L, and every car named here needs just one hose.

    Specifications

    Fit and size

    • Position: Upper
    • Quantity per vehicle: 1
    • Centerline length: 17.4 in (442 mm)
    • Inside diameter, both ends: 1.34 in (34 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded, without a spring
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Use for coolant only, not for fuel or oil transfer.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does this Gates radiator coolant hose fit the 1984-1985 Hyundai Pony 4-cylinder 1.6L?

    Yes, Gates 21170 is listed for the 1984-1985 Hyundai Pony 4-cylinder 1.6L, and that car takes one. If your car is a different one, look it up in the "Vehicles it fits" section.

    Is this Gates coolant hose made of EPDM?

    Yes. Gates 21170 has an EPDM tube and an EPDM cover that resists heat, ozone and chemical coolants, along with a synthetic fiber knit reinforcement.

    What are the inside diameter and length of the Gates 21170 hose?

    The inside diameter is 1.34 in (34 mm) at both ends, and the centerline length is 17.4 in (442 mm).

    How do I check an upper radiator hose for cracks or bulges?

    With the engine off and cool, look over the hose for cracks, bulges or coolant wetness. A shop can pressure-test the cooling system.

    Should I replace the clamps when installing this hose?

    Yes, replace the hose clamps each time a new coolant hose is installed. This hose is for coolant only, not for fuel or oil transfer.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review