Gates 21256 radiator coolant hose for the 1986-1991 Mitsubishi Fuso FM truck 6-cylinder 6.6L, the 1990-1991 FM truck 6-cylinder 7.5L and other vehicles and equipment carries coolant through the cooling system. This listing is one molded hose.
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped form for sealed connections
- EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A, except for tolerances
- Temperature range of -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Quick facts
- Part: Gates 21256 radiator coolant hose
- Fits: 1986-1991 Mitsubishi Fuso FM truck 6-cylinder 6.6L, the 1990-1991 FM truck 6-cylinder 7.5L and other vehicles and equipment
- Position: Upper, lower, lower - engine to pipe
- Material: EPDM
- Condition: New
Cracks, soft or swollen spots, or coolant seepage at the hose can mean it is worn. Look only with the engine off and cool. Before you replace the hose, rule out a loose or failed clamp or another leak source, since the same signs can have other causes.
Fits
The 1986-1991 Mitsubishi Fuso FK truck 6-cylinder 6.6L and the 1988-1991 Mitsubishi Fuso FH 6-cylinder 5.0L take this hose too, along with other vehicles and equipment, and each application takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: upper, lower, lower - engine to pipe
- Quantity per application: 1
- Centerline length: 14.9 in (378 mm)
- End 1 inside diameter: 1.75 in (44 mm)
- End 2 inside diameter: 2 in (51 mm)
Build and materials
- Construction: molded
- Material: EPDM
- Reinforcement: synthetic fiber knit
- Contains spring: No
- Condition: New
- Country of origin: United States
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Do not use this hose for fuel or oil transfer applications.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does this Gates radiator coolant hose fit the 1986-1991 Mitsubishi Fuso FM truck 6-cylinder 6.6L?
Yes. Gates 21256 is listed for the 1986-1991 Mitsubishi Fuso FM truck 6-cylinder 6.6L and the 1990-1991 FM truck 6-cylinder 7.5L. Open the "Vehicles it fits" section for other models and engines.
What is this Gates molded coolant hose made of?
The tube and the cover are EPDM, with synthetic fiber knit reinforcement. The cover resists heat, ozone and chemical coolants.
What temperature range does this Gates coolant hose handle?
Gates 21256 has a temperature range of -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C).
Can this be used as a Gates lower radiator hose?
Yes. Gates 21256 is listed for upper, lower and lower - engine to pipe positions. Its ends measure 1.75 in (44 mm) and 2 in (51 mm) inside diameter.
Do I need new clamps with this coolant hose?
Yes, put on new hose clamps whenever you install a new coolant hose. This hose is for coolant only, not for fuel or oil lines.
