Gates Radiator Coolant Hose P/N:22113
Gates 21878 lower radiator coolant hose for the 1990-1996 Nissan 300ZX V6 3.0L carries coolant between the engine and the radiator. This Gates coolant hose is molded and pre-shaped to fit.
Coolant leaks, a collapsed hose or swollen rubber can mean this hose is worn, though a radiator cap that no longer holds pressure or a faulty thermostat may also be behind them.
It is a direct-fit replacement for the 1990-1996 Nissan 300ZX V6 3.0L, which takes one.
Fit and size
Build and materials
Interchange: KM-3207
26198X · 62104 · 2150330P00 · 2150340P00 · 71669 · C71669 · CH3121 · 8568
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates lower radiator hose 21878 right for the 1990-1996 Nissan 300ZX V6 3.0L?
Yes. Gates 21878 is a lower radiator coolant hose for the 1990-1996 Nissan 300ZX V6 3.0L, and that car takes one.
What is the Gates radiator coolant hose made of?
Gates 21878 is listed as EPDM and plastic. It has an EPDM tube, a synthetic fiber knit reinforcement and a heat-, ozone- and coolant-resistant EPDM cover.
How long is this Gates molded coolant hose?
Centerline length is 41.3 in (1049 mm). The inside diameter is 1.34 in (34 mm) at end 1 and 1.56 in (40 mm) at end 2.
Can this lower radiator coolant hose be used for fuel or oil lines?
No. It is a coolant hose and is not for fuel or oil transfer. Gates 21878 has a temperature range of -40°F to +257°F (-40°C to +125°C).
Do the hose clamps need replacing with a new radiator coolant hose?
Yes. The hose clamps should be replaced each time a new coolant hose is installed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.