Lower Radiator Coolant Hose for 1995-1999 Mitsubishi Eclipse & More - Gates 22113

$55.99

Vehicles this part fits

    Part number: 22113
    UPC: 072053063295
    Condition: New
    Weight: 1.86 LBS
    Item Package Quantity: 1
    $55.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:22113
    Gates Radiator Coolant Hose P/N:22113
    $55.99
    $55.99

    Gates 22113 lower radiator coolant hose for the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and other vehicles carries engine coolant between the radiator and the engine.

    • Gates molded coolant hose line covers upper, lower, bypass, heater and other coolant applications
    • Specifically engineered materials resist collapse under vacuum
    • Built to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped molded form made for well-sealed connections
    • EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 22113 radiator coolant hose
    • Fits: 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and other vehicles
    • Position: Lower
    • Material: EPDM
    • Condition: New

    Coolant drips, a cracked, soft or swollen hose, or an engine running hot can mean this hose is worn, though a radiator cap or a thermostat can be behind overheating too. Look at the hose with the engine off and cool, and find the cause before you replace it.

    Fits

    This radiator coolant hose is a direct-fit replacement for the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and the 1995-1998 Eagle Talon 4-cylinder 2.0L, and either car takes one hose.

    Specifications

    Fit and size

    • Position: Lower
    • Quantity per vehicle: 1
    • Centerline length: 20.4 in (518 mm)
    • End 1 inside diameter: 1.31 in (33 mm)
    • End 2 inside diameter: 1.31 in (33 mm)

    Build and materials

    • Material: EPDM
    • Construction: Molded, no internal spring
    • Standards: SAE 20R4 class D2 and DIN 73411 class A (except for tolerances)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: KM-3380
    24313L · 72428 · E72428 · 62477 · MB906429 · 8784

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    24313L, 22113, 72428, E72428, 62477, MB906429, KM-3380, 8784

    Frequently Asked Questions

    Is this Gates lower radiator hose right for the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L?

    Yes. Gates 22113 fits the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and the 1995-1998 Eagle Talon 4-cylinder 2.0L, and each takes one hose.

    What size are the ends on this Gates radiator coolant hose?

    Both ends of the Gates 22113 have a 1.31 in (33 mm) inside diameter, and the hose has a centerline length of 20.4 in (518 mm).

    What is this Gates coolant hose made of?

    The tube is EPDM with synthetic fiber knit reinforcement, and the cover is heat-, ozone- and chemical coolant-resistant EPDM.

    Can I use this lower hose for fuel or oil lines?

    No. This hose is for coolant only and must not be used for fuel or oil transfer applications.

    Does Gates 22113 meet SAE or DIN standards?

    Yes. The Gates 22113 meets the requirements of SAE 20R4 class D2 and DIN 73411 class A, except for tolerances.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review