Keep coolant moving through your engine's lower cooling circuit with the Gates Molded Coolant Hose 22323, a pre-shaped lower radiator hose that drops in as a direct-fit replacement for the 1997-2000 Acura EL [L4-1.6L] and the 1996-2000 Honda Civic [L4-1.6L]. It's preformed to fit and to ensure a properly sealed connection.
Gates recommends replacing the hose clamps each time a new coolant hose is installed. Do not use for fuel or oil transfer applications. Country of origin: Thailand.
Interchange: 20308S · E90615 · 71604 · 72433 · E72433 · 62396 · 19502P2A000 · 8956
This part cross-references / interchanges with the following part numbers:
What vehicles does the Gates 22323 hose fit?
It's a direct-fit replacement for the 1997-2000 Acura EL and 1996-2000 Honda Civic, both with the L4-1.6L engine. Check the Buyer's Guide tab to confirm your vehicle.
What is this hose made of?
It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover that resists heat, ozone and chemical coolants.
Are hose clamps included?
Clamps are not listed as included. Gates recommends replacing the hose clamps each time a new coolant hose is installed.
What are the hose dimensions?
It has a centerline length of 29.9 in (759 mm) and a 1.04 in (26 mm) inside diameter at each end.
What temperature range does it handle?
It is rated for -40°F to +257°F (-40°C to +125°C) and meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except for tolerances).
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
