Lower Radiator Coolant Hose for 2005-2009 Buick LaCrosse & More - Gates 22373

$33.99

Vehicles this part fits

    Part number: 22373
    UPC: 072053321524
    Condition: New
    Weight: 1.15 LBS
    Item Package Quantity: 1
    $33.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:22373
    Gates Radiator Coolant Hose P/N:22373
    $33.99
    $33.99

    Gates 22373 lower radiator coolant hose for the 2005-2009 Buick LaCrosse V6 3.8L and other vehicles carries coolant between the radiator and the engine. This Gates radiator coolant hose is molded and pre-shaped to fit and to seal at its connections.

    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)
    • Meets SAE 20R4 class D2 and DIN 73411 class A, except for tolerances

    Quick facts

    • Part: Gates 22373 radiator coolant hose
    • Fits: 2005-2009 Buick LaCrosse V6 3.8L and other vehicles
    • Position: Lower
    • Material: EPDM
    • Condition: New

    A cracked, swollen or soft cover, coolant seepage near the hose ends, or a hose that collapses can mean it is worn. Look it over only with the engine off and cool. These signs alone do not prove the hose is the problem; a failing water pump can also leak coolant.

    Fits

    It is listed for a wide range of Buick, Chevrolet, Oldsmobile and Pontiac models, including the 2000-2005 Chevrolet Impala V6 3.8L and the 2005-2009 Buick Allure V6 3.8L, and each takes one. Driving something else? Look up your year, model and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Lower
    • Quantity per vehicle: 1
    • Centerline length: 16.3 in (414 mm)
    • End 1 inside diameter: 1.27 in (32 mm)
    • End 2 inside diameter: 1.52 in (39 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded
    • Internal spring: none
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 26354X · C90318 · 71591 · C71591 · 10245510 · 10341788 · 10402000 · 10423132 · 15835973 · 62444 · C2373 · 9006

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    26354X, 22373, C90318, 71591, C71591, 10245510, 10341788, 10402000, 10423132, 15835973, 62444, C2373, 9006

    Frequently Asked Questions

    Is this Gates lower radiator hose the right one for the 2000-2005 Chevrolet Impala V6 3.8L?

    Yes. Gates 22373 is listed for the 2000-2005 Chevrolet Impala V6 3.8L, and that car takes one. It is a lower hose, so it goes on the lower connection.

    What size is this Gates molded coolant hose?

    Gates 22373 has a centerline length of 16.3 in (414 mm). Its inside diameters are 1.27 in (32 mm) at one end and 1.52 in (39 mm) at the other.

    What temperature range does this EPDM radiator coolant hose handle?

    It has a temperature range of -40 °F to +257 °F (-40 °C to +125 °C). The EPDM cover resists heat, ozone and chemical coolants.

    Do I need new clamps with this Gates coolant hose?

    Yes, the hose clamps should be replaced each time a new coolant hose is installed. Gates 22373 is not for fuel or oil transfer applications.

    How can I tell if this EPDM lower hose is worn out?

    With the engine off and cool, look for cracks, a swollen or soft cover, or coolant seepage at the ends. If you are unsure, a shop can pressure-test the cooling system.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review