Gates Radiator Coolant Hose P/N:23913
Gates 22432 lower radiator coolant hose for the 2000-2005 Ford Excursion V10 6.8L and other vehicles carries coolant between the radiator and the engine. This Gates radiator coolant hose is made for specific applications, with its two branches built into the hose.
Coolant seepage at the hose, a swollen or cracked cover, or coolant loss with overheating can mean the hose is worn, though a faulty thermostat or a leaking radiator can also be behind them. Inspect the hose by eye with the engine cool. A vehicle takes one lower hose, and this listing is one hose.
The 2000-2005 Ford Excursion V10 6.8L, the 1999-2005 Ford F-450 Super Duty V10 6.8L and the 1999-2005 Ford F-550 Super Duty V10 6.8L take this hose, and so do other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One radiator coolant hose with two branches.
Interchange: KM-4348
F81A 8B273 BB · F81A 8B273 BC · F81Z 8286 BA · YC35 8B273 BE · 20374S · F10093 · 62845 · 9065
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates 22432 fit the 2000-2005 Ford Excursion V10 6.8L?
Yes, Gates 22432 is listed for the 2000-2005 Ford Excursion V10 6.8L and other vehicles; open the "Vehicles it fits" section to check your exact model and engine.
What are the end sizes on this Gates molded coolant hose?
On Gates 22432, End 1 is 1.72 in (44 mm) and End 2 is 1.81 in (46 mm) inside diameter; End 3 is 0.73 in and End 4 is 0.81 in (21 mm). Centerline length is 35.18 in (894 mm).
What does the Gates lower radiator hose come with?
This listing is one hose with two branches formed into it. Plan on new clamps when you fit a coolant hose.
What is this Gates coolant hose made of?
Gates 22432 has an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover. The listed material is EPDM and plastic.
Can this lower hose be used for fuel or oil lines?
No, it is a coolant hose and is not for fuel or oil transfer applications.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.