Keep coolant moving between the engine and radiator with the Gates Molded Coolant Hose 23363, an upper-position radiator hose pre-shaped to route into place on the 2006-2010 Ford Explorer (V6-4.0L), 2007-2010 Ford Explorer Sport Trac (V6-4.0L), and 2006-2010 Mercury Mountaineer (V6-4.0L). It's molded to OEM-quality specifications so you get a clean, direct fit without a trip to the dealer.
- EPDM construction: EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.
- Vacuum-resistant: specifically-engineered materials resist collapse under vacuum.
- Durability: engineered to resist electrochemical degradation, the leading cause of hose failure.
- Pre-shaped: molded to fit and help ensure perfectly sealed connections.
Meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except for tolerances), with a temperature range of -40°F to +257°F (-40°C to +125°C). Country of origin: United States. Caution: do not use for fuel or oil transfer applications. Gates recommends replacing the hose clamps each time a new coolant hose is installed.
Interchange: 20503S · 66011 · F10175 · 6L2Z 8260 BA · 6L2Z8260BA · 8L2Z 8260 B · 8L2Z8260B · KM5001 · 16101 · Manufacturer part number 23363.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does this hose fit?
It's a direct-fit upper coolant hose for the 2006-2010 Ford Explorer (V6-4.0L), 2007-2010 Ford Explorer Sport Trac (V6-4.0L), and 2006-2010 Mercury Mountaineer (V6-4.0L). See the Buyer's Guide tab to confirm your vehicle.
What is this hose made of?
It has an EPDM tube, synthetic fiber knit reinforcement, and a heat-, ozone- and chemical coolant-resistant EPDM cover.
What standards does it meet?
It meets the requirements of SAE 20R4 class D2 and DIN 73411 class A (except for tolerances), with a temperature range of -40°F to +257°F.
Should I replace the clamps when installing it?
Gates recommends replacing the hose clamps each time a new coolant hose is installed.
Can this hose be used for fuel or oil?
No. Per Gates, do not use this coolant hose for fuel or oil transfer applications.
Write a Review