Keep coolant moving cleanly through the lower cooling circuit with the Gates Molded Coolant Hose 23738, a pre-shaped lower radiator hose that drops in as a direct-fit replacement for the 2010-2013 Hyundai Tucson (L4-2.4L), 2011-2013 Hyundai Tucson (L4-2.0L), and 2011-2013 Kia Sportage (L4-2.4L). It's pre-formed to route through the factory bends so the connections seat and seal without cutting or splicing generic hose.
Gates recommends fitting new hose clamps whenever a coolant hose is replaced. Do not use for fuel or oil transfer. Country of origin: United States.
Interchange: 27043X · 66604 · 72536 · E72536 · 254122S100 · 16426
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Gates 23738 hose fit?
It's a direct-fit lower coolant hose for the 2010-2013 Hyundai Tucson (L4-2.4L), 2011-2013 Hyundai Tucson (L4-2.0L), and 2011-2013 Kia Sportage (L4-2.4L). Check the Buyer's Guide tab to confirm your vehicle.
What is this hose made of?
It has an EPDM tube, a synthetic-fiber knit reinforcement, and an EPDM cover that resists heat, ozone, and chemical coolants.
What are the dimensions?
The hose has a 26.2 in (665 mm) centerline length and a 1.35 in (34 mm) inside diameter at each end. It's a molded, pre-shaped single-piece hose.
Do I need new hose clamps?
Gates recommends installing new hose clamps each time a coolant hose is replaced to ensure a proper seal.
Can this hose be used for fuel or oil lines?
No. This is a coolant hose only — do not use it for fuel or oil transfer applications. It's rated for -40°F to +257°F (-40°C to +125°C).
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
