Upper Radiator Coolant Hose for 2014 Chevrolet Impala & More - Gates 24514

$135.99

Vehicles this part fits

    Part number: 24514
    UPC: 770075682356
    Condition: New
    Weight: 0.98 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $135.99
    Adding to cart… The item has been added

    Have questions?

    Gates Radiator Coolant Hose P/N:24514
    Gates Radiator Coolant Hose P/N:24514
    $135.99
    $135.99

    Gates 24514 upper radiator coolant hose for the 2014 Chevrolet Impala 4-cylinder 2.4L and other vehicles carries engine coolant between the radiator and the pipe. This Gates radiator coolant hose is a molded hose, sold one per listing.

    • ThermalPro Premium molded coolant hose line
    • Specifically engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to give a sealed connection
    • EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)

    Quick facts

    • Part: Gates 24514 radiator coolant hose
    • Fits: 2014 Chevrolet Impala 4-cylinder 2.4L and other vehicles
    • Position: Upper, radiator to pipe
    • Material: EPDM
    • Condition: New

    A cracked, swollen or weeping hose can mean this hose is worn, though a failing radiator cap or thermostat can be behind the same signs. The engine takes one hose at the upper radiator connection.

    Fits

    This hose is listed for several Chevrolet and Buick models, including the 2013-2014 Chevrolet Malibu 4-cylinder 2.4L and the 2012-2016 Buick LaCrosse 4-cylinder 2.4L. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: upper, radiator to pipe
    • Quantity per vehicle: 1
    • Centerline length: 15.85 in (403 mm)
    • End 1 inside diameter: 1.12 in (28 mm)
    • End 2 inside diameter: 1.31 in (33 mm)

    Build and materials

    • Material: EPDM
    • Construction: molded, without a spring
    • Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 20729S · 67068 · C91919 · 73145 · D73145 · 22922981 · 17162

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    20729S, 67068, C91919, 73145, D73145, 22922981, 17162

    Frequently Asked Questions

    Does the Gates 24514 upper radiator coolant hose fit the 2014 Chevrolet Impala 4-cylinder 2.4L?

    Yes, Gates 24514 is listed for the 2014 Chevrolet Impala 4-cylinder 2.4L. Open the "Vehicles it fits" section to check other models and engines.

    What is this Gates molded coolant hose made of?

    Gates 24514 has an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover.

    What are the end sizes on this radiator coolant hose?

    End 1 has a 1.12 in (28 mm) inside diameter and end 2 has 1.31 in (33 mm). The centerline length is 15.85 in (403 mm).

    Can the Gates coolant hose carry fuel or oil?

    No, this hose is for coolant only and must not be used for fuel or oil transfer; its temperature range is -40 °F to +257 °F (-40 °C to +125 °C).

    Does this EPDM radiator coolant hose meet any SAE standards?

    Gates 24514 meets requirements of SAE 20R4, class D2 and DIN 73411, class A, except for tolerances.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review