Gates 90K-39424A serpentine belt drive component kit for the 2018-2024 Toyota Camry V6 3.5L and other vehicles services the whole accessory belt drive in one repair. Replacing the tensioner and pulley at the same time as the belt matters, because skipping them can shorten the life of the belt and other front-end accessory components.
- Serpentine belt, tensioner and idler pulley in one kit
- Serpentine belt with EPDM construction
- Kit contents vary with the specific vehicle application
Quick facts
- Part: Gates 90K-39424A serpentine belt drive component kit
- Fits: the 2018-2024 Toyota Camry V6 3.5L and other vehicles
- Condition: New
A squeal, a cracked or glazed belt, or a rattle from the tensioner can mean the belt drive is worn, though a worn alternator or A/C compressor bearing can make similar noises, so find the cause before replacing parts.
Fits
This Gates serpentine belt drive component kit fits the 2018-2024 Toyota Camry V6 3.5L, the 2017-2022 Toyota Highlander V6 3.5L and the 2017-2020 Toyota Sienna V6 3.5L. If your car is not one of these, look up its year, model and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside circumference: 1577 mm (62.076 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Contents: belt, tensioner, idler pulley
- Belt construction: EPDM
- Belt part number: K060615
- Tensioner assembly part number: 38777
- Idler pulley part number: 36173
- Condition: New
- Country of origin: Canada
In the box
One kit with a serpentine belt, tensioner and idler pulley. This listing is one kit, and the vehicle needs one.
Installation notes
- Applicable tensioner hardware is included.
- Installation instructions and tech tips come with the kit for easy, accurate installation.
Frequently Asked Questions
Does the Gates 90K-39424A fit the 2018-2024 Toyota Camry V6 3.5L?
Yes. Gates 90K-39424A fits the 2018-2024 Toyota Camry V6 3.5L, and that engine takes one kit.
Does this Gates drive belt kit come with the belt, tensioner and idler pulley?
Yes. Gates 90K-39424A includes a serpentine belt, tensioner and idler pulley, plus applicable tensioner hardware and installation instructions. Contents vary with the vehicle application.
What size is the belt in this serpentine belt kit?
The belt measures 1577 mm (62.076 in) in outside circumference and is 20 mm (0.807 in) wide across the top.
Should the tensioner and idler pulley be replaced along with a worn serpentine belt?
Yes. Leaving the tensioner and pulley out when you change the belt can shorten the life of the belt and other front-end accessory components, so this kit supplies all three.
Is the EPDM belt in this kit built to OE standards?
Yes. The kit meets or exceeds OE standards in form, function and fit, and its belt is OE-equivalent with EPDM construction.
