Dorman Bolt P/N:980-425D
Dorman 960-425D bolt is a Grade 8 hex bolt with a 1/2-13 coarse thread that clamps parts together.
A bolt with stripped threads, a rounded hex head or heavy rust may need replacing. A worn nut, a damaged tapped hole or a clamped part that has loosened can also be behind a loose joint, so find that cause before buying.
This is universal hardware, sold by size rather than by vehicle. Match the 1/2-13 thread, the 2-1/2 in length and the Grade 8 rating to the bolt being replaced.
Fit and size
Build and materials
Two bolts.
Interchange: 5016
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will a 1/2-13 x 2-1/2 in bolt fit the hole I am repairing?
Yes, when your old bolt has a 1/2 in diameter, 13 threads per inch and a 2-1/2 in length. Dorman 960-425D is sold by size and thread, not by vehicle, so match those three to the bolt being replaced.
What is in a Dorman 960-425D pack?
The pack holds two 1/2-13 x 2-1/2 in hex bolts. The package contents list only the bolts.
Is this bolt Grade 8 and heat hardened?
Yes. Dorman 960-425D is a Grade 8 steel hex bolt, heat hardened, with a yellow zinc finish.
Is the finish on this yellow zinc hex bolt tested for corrosion?
Yes. The hardware goes through salt spray testing to confirm corrosion resistance, and this bolt carries a yellow zinc finish.
Is 5016 a cross-reference for this bolt?
Yes, 5016 is listed as an interchange number for Dorman 960-425D. Still match the 1/2-13 thread and 2-1/2 in length to your old bolt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.