Hitachi Astemo Fuel Injection Throttle Body P/N:ETB0104
Hitachi Astemo ETB0046 fuel injection throttle body for the 2011-2016 Ford F-150 V6 3.5L and other vehicles controls how much air enters the engine. It is a new electric unit with the throttle position sensor included.
A rough idle, hesitation when you press the pedal or a throttle warning light can mean the throttle body is wearing out. If the throttle body is the cause, this unit replaces it. With the engine off and cool, first look over the connector and the bore for damage or heavy carbon buildup; a shop can test the electronics and the sensor.
It is listed for a wide range of Ford and Lincoln models, among them the 2015-2017 Ford Expedition V6 3.5L and the 2015-2020 Ford Transit-150 V6 3.5L. If your vehicle is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
This listing is one electric throttle body with its throttle position sensor, and each vehicle takes one. The gasket or seal, mounting hardware and idle air control motor are not included, so plan on new bolts and a gasket rather than reusing the old ones.
Interchange: 67-6022 · BL3Z-9E926-A · BL3Z-9E926-B
S20062
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Hitachi Astemo ETB0046 the right throttle body for a 2011-2016 Ford F-150 V6 3.5L?
Yes. Hitachi Astemo ETB0046 is listed for the 2011-2016 Ford F-150 V6 3.5L. The 2015-2017 Ford Expedition V6 3.5L takes the same throttle body.
Does this throttle body come with a gasket and mounting bolts?
No. The box holds one electric throttle body with its throttle position sensor. The gasket or seal, mounting hardware and idle air control motor are not included.
What bore size and connector does the ETB0046 have?
Hitachi Astemo ETB0046 has a 68 mm bore. Its oval connector has six male blade terminals.
How do I know if my electronic throttle body is going bad?
Common signs are a rough idle, slow response when you press the pedal and a throttle warning light. A shop can scan and test the unit to confirm.
Does BL3Z-9E926-A interchange with this Hitachi Astemo throttle body?
Yes. BL3Z-9E926-A is an interchange number for ETB0046, along with 67-6022, BL3Z-9E926-B and S20062.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.