Clutch Flywheel for 1992-1999 Toyota Paseo & More - LuK LFW170

$102.99

Vehicles this part fits

    Part number: LFW170
    UPC: 670774100512
    Condition: New
    Weight: 16.70 LBS
    Item Package Quantity: 1
    $102.99
    Adding to cart… The item has been added

    Have questions?

    LuK Clutch Flywheel P/N:LFW170
    LuK Clutch Flywheel P/N:LFW170
    $102.99
    $102.99

    LuK LFW170 clutch flywheel for the 1992-1999 Toyota Paseo 4-cylinder 1.5L and other vehicles gives the clutch a friction surface to work against at the end of the crankshaft. Every component, including the ring gear, is engineered and manufactured to OE specifications.

    • Rigid LuK flywheel that replaces the old one instead of resurfacing it
    • Dynamically balanced to eliminate vibration and increase clutch performance
    • Dowel pins and ring gear come with the flywheel
    • Smooth, flat friction surface for proper clutch operation

    Quick facts

    • Part: LuK LFW170 clutch flywheel
    • Fits: 1992-1999 Toyota Paseo 4-cylinder 1.5L and other vehicles
    • Condition: New

    A scored or uneven flywheel face can show up as clutch chatter, a shudder when pulling away or vibration felt through the pedal. Before you replace the flywheel, rule out the clutch disc, pressure plate and release bearing as the source. Each engine carries a single flywheel on its crankshaft, so this listing covers one.

    Fits

    The same flywheel also fits the 1989-1998 Toyota Tercel 4-cylinder 1.5L, a direct-fit replacement for both cars.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outside diameter: 217.5 mm (8.563 in)
    • Overall casting O.D.: 266 mm (10.472 in)
    • Friction surface outer diameter: 204 mm (8.031 in)
    • Friction surface inner diameter: 123 mm (4.843 in)
    • Centering diameter / dowel hole: 238 mm (9.370 in)
    • Ring gear mounting O.D.: 236 mm (9.291 in)
    • Pilot I.D.: 36 mm (1.417 in)
    • Crankshaft register diameter: 11 mm (.433 in)
    • Bolt hole PCD, crankshaft: 63.7 mm (2.508 in)
    • Bolt hole PCD, clutch pressure plate: 238 mm (9.370 in)
    • Dowel hole diameter: 8 mm (.315 in)
    • Flywheel thickness: 26 mm (1.024 in)

    Build and materials

    • Type: rigid (solid) flywheel
    • Dowel pins: with dowel pins
    • Ring gear: 107 teeth, chamfer on the engine side
    • Ring gear number: 326310084
    • Balancing: dynamically balanced
    • Condition: New
    • Country of origin: China

    Interchange: 167114 · 4160154100 · NFW6924

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    167114, 4160154100, NFW6924

    Frequently Asked Questions

    Is the LuK LFW170 flywheel right for the 1989-1998 Toyota Tercel 4-cylinder 1.5L?

    Yes, LuK LFW170 fits the 1989-1998 Toyota Tercel 4-cylinder 1.5L, and it also fits the 1992-1999 Toyota Paseo 4-cylinder 1.5L.

    Does this flywheel come with dowel pins?

    Yes, this flywheel comes with dowel pins; the dowel holes are 8 mm in diameter and the centering diameter is 238 mm.

    What is the friction surface size on the LuK LFW170?

    The LuK LFW170 friction surface measures 204 mm across on the outside and 123 mm on the inside. The overall casting O.D. is 266 mm.

    Can a scored flywheel face cause clutch chatter?

    Yes, a scored or uneven friction face can contribute to chatter or a shudder when pulling away. A shop can inspect the face and measure it.

    Does LuK LFW170 replace flywheel number NFW6924?

    Yes, NFW6924 is one of the numbers LuK LFW170 replaces.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review