LuK LFW287 clutch flywheel for the 2005-2006 Toyota Corolla 4-cylinder 1.8L and other vehicles carries engine torque from the crankshaft to the clutch. Every component, including the ring gear, is made to OE specifications, and the flywheel is new.
- Smooth, flat friction surface for proper clutch operation
- Dynamically balanced to help eliminate vibration
- 106-tooth ring gear with the chamfer on the engine side
- Rigid flywheel, an alternative to resurfacing the old one
- Engineered for a longer service life of the flywheel and clutch system
Quick facts
- Part: LuK LFW287 clutch flywheel
- Fits: 2005-2006 Toyota Corolla 4-cylinder 1.8L and other vehicles
- Condition: New
A worn flywheel can show up as clutch slipping, shudder when you pull away, or vibration felt through the pedal. Before you replace this flywheel, rule out a worn clutch disc or pressure plate, which can also produce slipping or shudder.
Fits
This flywheel is listed for a wide range of Toyota and Pontiac models, including the 2003-2006 Toyota Matrix 4-cylinder 1.8L and the 2003-2006 Pontiac Vibe 4-cylinder 1.8L. The 2005-2006 Toyota Corolla 4-cylinder 1.8L takes one flywheel.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 271.3 mm (10.681 in)
- Overall casting O.D.: 268.03 mm (10.552 in)
- Friction surface outer diameter: 216.5 mm (8.524 in)
- Friction surface inner diameter: 130 mm (5.118 in)
- Ring gear mounting O.D.: 237 mm (9.331 in)
- Pilot I.D.: 44.85 mm (1.766 in)
- Centering diameter / dowel hole: 249.9 mm (9.839 in)
- Dowel hole diameter: 7.9 mm (0.311 in)
- Crankshaft register diameter: 10.5 mm (0.413 in)
- Crankshaft bolt hole PCD: 66.92 mm (2.635 in)
- Pressure plate bolt hole PCD: 249.92 mm (9.839 in)
- Flywheel thickness: 32.53 mm (1.281 in)
- Ring gear thickness: 9.2 mm (0.362 in)
Build and materials
- Type: rigid flywheel
- Balance: dynamically balanced
- Condition: New
- Country of origin: Thailand
In the box
One flywheel with dowel pins.
Interchange: 167143 · 4160222100
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the LuK LFW287 clutch flywheel fit the 2005-2006 Toyota Corolla 4-cylinder 1.8L?
Yes. The LuK LFW287 is listed for the 2005-2006 Toyota Corolla 4-cylinder 1.8L. If your car is a different model, look for it in the Vehicles it fits section on this page.
Does this flywheel come with dowel pins?
Yes. The LuK LFW287 is supplied with dowel pins. The listing is one flywheel.
What is the outside diameter of the LuK LFW287 flywheel?
The outside diameter is 271.3 mm (10.681 in). The friction surface is 216.5 mm (8.524 in) across at its outer edge and 130 mm (5.118 in) at its inner edge.
Is this rigid flywheel dynamically balanced?
Yes. The LuK LFW287 is dynamically balanced to help eliminate vibration. It is a new flywheel.
Does the LuK LFW287 interchange with 167143 or 4160222100?
Yes. 167143 and 4160222100 are listed as interchange numbers for the LuK LFW287 flywheel.
