LuK LFW369 clutch flywheel for the 1998 Subaru Forester H4 2.5L and other vehicles gives the clutch a smooth, flat friction surface to work against. It is a rigid flywheel, and every component, ring gear included, is made to OE specifications.
- Rigid flywheel with a smooth, flat surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 124 teeth, supplied with dowel pins
- A new flywheel is an alternative to resurfacing the old one
- Engineering and materials aimed at a longer service life for the flywheel and clutch system
Quick facts
- Part: LuK LFW369 clutch flywheel
- Fits: 1998 Subaru Forester H4 2.5L and other vehicles
- Condition: New
A worn or heat-damaged flywheel can show up as clutch chatter, vibration, or grinding when the starter engages. A worn clutch disc, pressure plate or release part may produce similar symptoms, so pin down the source before buying. While the clutch is apart for service, look at the friction face for cracks, deep grooves or blue heat marks, and at the ring gear teeth for chips.
Fits
It fits the 1998 Subaru Forester H4 2.5L, the 1996-1999 Subaru Legacy H4 2.5L and the 1998 Subaru Impreza H4 2.5L, and each takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 314.6 mm (12.386 in)
- Overall casting O.D.: 302 mm (11.890 in)
- Ring gear mounting O.D.: 289.38 mm (11.393 in)
- Friction surface outer diameter: 232 mm (9.134 in)
- Friction surface inner diameter: 147 mm (5.787 in)
- Pilot I.D.: 31.93 mm (1.257 in)
- Crankshaft register diameter: 10.45 mm (.411 in)
- Centering diameter / dowel hole: 268 mm (10.551 in)
- Bolt circle, crankshaft: 66 mm (2.598 in)
- Bolt circle, clutch pressure plate: 268 mm (10.551 in)
- Dowel hole diameter: 6 mm (.236 in)
- Flywheel thickness: 29.33 mm (1.155 in)
- Ring gear thickness: 11 mm (.433 in)
Build and materials
- Type: rigid flywheel, dynamically balanced
- Ring gear teeth: 124
- Dowel pins: included
- Ring gear chamfer: matches OE
- Condition: New
- Country of origin: China
Interchange: 12310-AA210 · 12310-AA22A
4160196100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4160196100, 12310-AA210, 12310-AA22A
Frequently Asked Questions
Is this the clutch flywheel for the 1998 Subaru Impreza H4 2.5L?
Yes. LuK LFW369 fits the 1998 Subaru Impreza H4 2.5L, and each vehicle takes one flywheel.
Does this LuK flywheel come with dowel pins?
Yes. LuK LFW369 comes with dowel pins, and the dowel hole diameter is 6 mm (.236 in).
How many teeth does the ring gear on this flywheel have?
The ring gear has 124 teeth and is 11 mm thick. Its chamfer matches OE.
Is this solid flywheel balanced?
Yes. This rigid flywheel is dynamically balanced to eliminate vibration and increase clutch performance.
Can I use this flywheel instead of resurfacing my old one?
A new flywheel is an alternative to resurfacing, and this one has a smooth, flat friction surface for proper clutch operation. A shop can measure your old flywheel.
